1. DL manuals
  2. Meicheng
  3. Switch
  4. EX-G016
  5. User Manual

Meicheng EX-G016 User Manual - Hardware Installation

Other manuals for EX-G016: User Manual
Manual is about: HDMI over Single CAT5 Distribution Series

Summary of EX-G016

  • Page 1

    Ex-g016 2x8 hdmi 1.3 over single cat5 cascading distribution amplifier user manual page 1 of 9.

  • Page 2: Safety and Notice

    Safety and notice the ex-g016 2x8 hdmi 1.3 over single cat5 cascading distribution amplifier has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the ex-g016 should be used with care. Please rea...

  • Page 3: Features

    Features z state-of-the-art silicon image (founder of hdmi) chipset embedded for upmost compatibility and reliability z hdmi 1.3c compliant z hdcp compliant z hdmi video distribution to up to 7 displays and one cat5e receiver or cascade to another ex-g016 z acts as a 2x1 hdmi switch plus a 1x8 hdmi ...

  • Page 4

    Specifications & package contents model name ex-g016 ex-g076a ex-g076b technical role of usage 2x8 distribution amplifier transmitter [tx] receiver [long range rx] receiver [short range rx] hdmi compliance hdmi 1.3c hdcp compliance 0yes video bandwidth single-link 340mhz [10.2gbps] video support 480...

  • Page 5: Panel Descriptions

    Panel descriptions front panel 4 3 1 2 1. 1.2a/1.3a: output format led indicator [green: hdmi 1.3 / red: hdmi 1.2] 2. Format sel: push button for hdmi output format selection 3. In 1/in 2: input led indicator [green: hdmi input / red: rj-45 input] 4. In sel: push button for input hdmi source selecti...

  • Page 6: Dip Switch

    Dip switch pin#1 position off [©] on [ª] pin#2 position off [©] on [ª] edid mode use default edid use learned edid 1 audio mode 7.1 channel 2 stereo note 1 set pin#1-on [ª] first and then connect the hdmi input to hdmi display thru hdmi cable. Wait for 20 seconds. The recording procedure will be fin...

  • Page 7: Hardware Installation

    Hardware installation 1. Connect cat-5e cable if using any cat-5e hdmi video transmitter as cascading source 2. Connect hdmi input to hdmi compliant sources (such as a blu-ray disc player) 3. Connect all hdmi outputs to the hdmi displays 4. Connect rj-45 output to hdmi over cat5 receiver through cat...

  • Page 8: Notice

    Notice 1. If the dvi or hdmi device requires the edid information, please use edid reader/writer to retrieve and provide dvi/hdmi edid information. 2. All hdmi over cat5 transmission distances are measured using belden cat5e 125mhz lan cable and astrodesign video signal generator vg-859c. 3. The tra...

  • Page 9: Limited Warranty

    Limited warranty the seller warrants the ex-g016 2x8 hdmi 1.3 over single cat5 cascading distribution amplifier to be free from defects in the material and workmanship for 1 year from the date of purchase from the seller or an authorized dealer. Should this product fail to be in good working order w...