Modern-Aire Ventilation Hood Installation Instructions - Index:
3. Cutting or drilling holes there is a risk of damage to wiring. Check
first to locate power sources, ducting, or other utilities.
4. All hoods must be ducted to the outside (unless recirculation hood
is ordered).
5. To reduce the risk of a fire always uses metal ducting. Also never
vent exhausts into open wall spaces, crawl spaces, attics, or
garages. .
For maximum efficiency, use external blowers. Refer to our catalog for
hood and blower combinations.
Fire Safety Tips:
To Reduce risk of fire never leave cooking units unattended. A boil over
and spillovers can cause smoking and grease can ignite. When heating
up oils start slowly on low settings and gradually increase temperature as
needed. Always turn the hood on prior to cooking to increase circulation,
and to create positive air flow. Clean fans and filters as often as possible
to avoid an accumulation of grease in the hood and ducting. This will
help you to avoid fires and animal infestations. Always use approved
cookware for cooking on all high heat units. Always use the appropriate
hood and blower combination to ensure maximum performance.
Index:
1. Height of the hood
2. prepping the hood for installation
3. Electrical supply
4. Installing hood Canopy
5. Installing Ducting & Duct covers
6. Ducting for Blowers
7. Roof Blower Application
8. Wall Blower Application
Height of the hood:
0010-16B1
Modern Aire at
::
rangehoods
.
com
is a division of
kitchen
::
accessories
::
rangehoods
.
com
Call 1-800-667-8721 anywhere in the US and Canada
-
www.rangehoods.com