- DL manuals
- Modern Flames
- Indoor Fireplace
- AL100CLX
- Installation & Service Instructions Manual
Modern Flames AL100CLX Installation & Service Instructions Manual
Summary of AL100CLX
Page 1
Ambiance clx electric series al45clx • al60clx • al80clx • al100clx • al144clx installation/service instructions for use in united states and canda.
Page 2: User Instructions
2 user instructions read these instructions completely before beginning installation. Failure to follow them could cause a heater malfunction resulting in serious injury and/or property damage. Warning: all electric heaters have hot and arcing or sparking parts inside. Do not use it in areas where g...
Page 3: User Instructions
3 table of contents important instructions .................................. 3 power data ................................................. 4 product dimensions .................................... 4 box contents ............................................... 5 unpacking and testing .................
Page 4: User Instructions
4 user instructions user instructions the heater off and inspect for any objects on or adjacent to the heater that may have blocked the airflow or otherwise caused high temperatures to have occurred. Do not operate the heater with the alarm illuminating. 12. Do not operate any heater with a damaged ...
Page 5: User Instructions
5 box contents 1 fire unit 1 glass face 3 l-metal brackets 4 wall anchors 4 small washer head screws 4 large washer head screws 1 remote 1 mounting bracket user instructions model viewing area face dimensions firebox dimensions al45clx 27” w x 10” h 45” w x 25 1/2” h 29 1/4” w x 19 1/4” h x 5 1/2” d...
Page 6: User Instructions
6 user instructions installation unpacking and testing this heater is for use on 120 volts. The cord has a plug as shown at a. An adapter as shown at c is available for connecting three- blade grounding-type plugs to two-slot recep- tacles. The green grounding lug extending from the adapter must be ...
Page 7: Installation
7 installation warning - risk of fire! The power cord must not be pinched or against a sharp edge. Secure cord to avoid tripping or snagging to reduce the risk of fire, electric shock or personal in- jury. Do not run cord under carpeting. Do not cover cord with throw rugs, runners or the like. Arran...
Page 8: Installation
8 installation installation recessed installation: 1. Prepare frame opening according to chart. Frame opening is slightly larger than the fire unit. For best concealment, a qualified electrician should add an electrical outlet per local building codes anywhere in the shaded area. Install 110v outlet...
Page 9: Installation
9 wall-hung installation: 1. Hang the mounting bracket with the included large washer head screws and wall anchors. Wall anchors should be used at the highest outside corners. Be certain that at least two screws are driven in to solid backing. Use the chart to see proper distance between the screws ...
Page 10: Operation
10 operation operation operation on the bottom of the unit is a main power switch. Switch this to the on position to begin using the fireplace. Directly below the flame, on the right hand side are 3 small led status lights, as well as function controls and a digital temperature readout. When all ind...
Page 11: Operation
11 operation remote operation: to turn on the remote control, long press the power button until the display turns on (long pressing the power button while the remote is on will turn off the remote). Powering on the remote will bring you to the home screen (pictured on the right). Use the navigation ...
Page 12: Maintenance
12 maintenance maintenance al clx service parts item photo comments mfpcb1 printed circuit board controls low voltage and high voltage functions mftc2 lcd touch control mfttc2 lcd temperature touch control mfrr1 remote control ir receiver mf12vt1 transformer mfhf12015 heater fan 120 v 1500 watts mfp...
Page 13: Maintenance
13 frequently asked questions q. How do you program the remote control? A. The remote comes pre-programmed, however to add features or toggle fahrenheit/celsius long press the power and home buttons to bring up the program menu. Use the enter key to select the device (al_clx), confirm the rgb halo l...
Page 14: Maintenance
14 troubleshooting problem possible cause corrective action flame is not visible when unit is turned on a. Wiring is loose a. Disconnect unit from power source and inspect for loose connections b. Motherboard is defective b. Replace motherboard fireplace lights up but there is no flame image a. Wiri...
Page 15: Maintenance
15 maintenance problem possible cause corrective action nothing comes on (touch screen, etc.) a. Fireplace is not plugged in to an electrical outlet a. Check plug b. Breaker tripped or outlet has no power b. Reset breaker, test outlet for power c. Power switch is not in the “on” position (bottom rig...
Page 16: Maintenance
16 cleaning and maintenance instructions there is very little maintenance involved with your electric fireplace. Please follow the few points be- low: on a semi-annual basis unplug the machine from it’s power source, wait for the heating element to cool and dust the fire unit with a dry cloth. Be ca...
Page 17: Maintenance
17 maintenance notes.
Page 18: Maintenance
18 notes maintenance maintenance.
Page 19: Maintenance
19 maintenance notes.
Page 20
20 © 2015 www.Modernflames.Com please dispose of properly..