Modernhomes 67500 Mahogany Effect Installation And User Instruction Manual - page 4
4
Important Safety Instructions
IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ
CAREFULLY AND RETAINED FOR FUTURE REFERENCE
unless constant supervision is provided.
Getting Started
Remove the appliance from the box.
Remove any packaging from the product.
Place the packaging inside the box and either store or dispose of safely.
Please retain all packaging until you have checked and counted all the parts and the contents of the
fixing pack against the parts list.
Contents of Carton
Heater
Wall fixing bracket
Fixing screws and wall plugs
Remote control
1 Instruction Manual
Helpful Advice Before Fitting
The fixing pack contains small items which should be kept away from young children.
We suggest that you open the fixing pack and place all the contents into a container, therefore reducing
the risk of losing any small pieces.
Installation
Do not connect the appliance to the power supply until properly fixed to the wall and the instructions
read fully
The minimum distances must be observed.
For installation of the appliance, care must be taken not to damage concealed cables.
Please be careful while drilling the holes.
This appliance is designed to be permanently fixed to a wall. Ensure the wall is sufficiently strong enough
to hold the weight of the fire. Brick or breeze block walls are ideal. If positioning on plasterboard wall,
it must be fixed to timber batons. If you are not sure that the area is structurally stable then consult it
qualified builder. The wall bracket must be fixed horizontally and the cable routed to the bottom right of
the heater. The appliance is not designed to be installed in a recess.
A height of 60cm/23.6inch from bottom of heater to floor is recommended for optimum viewing of fuel
bed
—
see Fig.2 for recommends fixing dimensions.
Keep top of heater at least 100cm/39.4inch away from ceiling or other objects for optimum heat
ventilation.