Modulaire 120-1469 User Manual

Modulaire AM/FM Component Stereo System 

(120-1469)                 Controls                   Faxback Doc. # 18931 

POWER SWITCH 

Depressing the white dot on the switch will turn the unit on, at which time 

the dial will illuminate. 

SELECTOR SWITCH 

This switch will select the program source that will be reproduced by your 

system. 

AM 

In this position, all standard AM broadcasts are reproduced. 

FM MONO 

In this position, all FM broadcasts will reproduced monaurally.  If the 

stereo indicator illuminates, it is an indication that the station is 

transmitting stereo broadcasts. 

FM STEREO 

In this position, your system is capable of reproducing FM stereo 

broadcasts in stereo.  It will also reproduce monaural broadcasts 

monaurally. 

PH/TAPE 

In this position, your system will reproduce either a tape or record 

depending on the device that is being used. 

VOLUME 

Controls the loudness of the system, rotation in a clock, wise direction 

increases the loudness and rotation in a counter-clockwise direction 

decreases the loudness. 

BALANCE 

This control is used to balance any differences in level from left to right 

channel due to difference in program material or associated equipment 

Control should be set for approximately equal levels from your speakers.