ModWright Instruments KWA 100 Owner's Manual - Connections:
of
8
Connections:
•
Inputs: One pair RCA; One pair XLR. RCA and XLR inputs are transformer coupled
to input stage with floated ground. Connect to preamp outputs.
•
Outputs: Left and Right 5-way binding posts. Connect to speaker binding posts.
•
Led On/ Led Off Switch: Turns internal LED’s On/Off.
•
Main Power Toggle: Turns mains power to unit On/Off.
•
GND Toggle: Allows for connection of signal ground to chassis ground.
•
Mains power inlet. Connect to power mains of appropriate voltage. If labeled 120V,
plug into 120VAC mains outlet. If labeled 220V or 240V, then plug into appropriate
AC mains outlet. ALWAYS USED GROUND AC POWER CORD.
4