Moehlenhoff AR HK 4010 K User Manual - page 8
22
ENG
DEU
FRA
ITA
SPA
NLD
RUS
Switch Ball
Energy saving mode „ON“. Independently of
external signals, the temperature setback is
activated manually and the temperature is
reduced/increased by 2-6 K.
Energy saving mode „OFF“. No temperature
setback / setup in this mode.
The thermostate works in normal mode.
Energy saving mode „AUTOMATIC“. Depending on the signal from a HKmo-
dul or a timer
,the energy saving mode is turned on resp. turned off.
(ON:
connected to L1)
Indicator Symbol ICE CRYSTAL
The symbol ICE CRYSTAL illuminates when the
mode COOLING is active. The Change-Over input is
connected through an external contact with L1
or the thermostat receives the signal COOLING.
through the setback channel of a Basis HKmodule.
When using a HK-module the CO-Output is not
inquired.
Indicator Symbol MOON
MOON illuminates, if temperature setback is
activated.