Moen 4962 series Specifications
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION
•
Hydrolock® quick connect system
•
Metal construction with various finishes identified by suffix
•
1/2" IPS shanks
•
Designed to be installed on 8" to 16" centers
•
Includes metal pop-up type waste assembly
OPERATION
•
Acrylic knob style handles.
•
Rotate either handle in a counterclockwise manner to open and
clockwise to close
FLOW
•
Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi, for products
made before October 2008 flow is limited to 2.2 gpm max (8.3 L/min)
CARTRIDGE
•
1224 cartridge design
•
Nonmetallic and stainless steel material
STANDARDS
•
Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1,
and all applicable requirements referenced therein.
•
Certified to ANSI/NSF 61/9
•
Contains no more than 0.25% weighted average lead content
•
Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
WARRANTY
•
Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
•
5 year warranty if used in commercial installations
CHATEAU
®
Two-Handle Widespread
Lavatory Faucet
With Metal Waste Assembly
Model: 4962 series
With 50/50 Waste Assembly
Bulk Pack (6 per carton)
Model: 64962 series
NOTE: SPOUT INSTALLS THROUGH 1" MIN. DIA. HOLE.
VALVES INSTALL THROUGH 1-1/8" MIN. DIA. HOLE
4-1/4"
(108mm)
5-1/2"
(140mm)
ESCUTCHEON DIA.
2-1/8"
(54mm)
8"
(203mm)
4"
(101mm)
2-3/4"
(70mm)
Rev. 3/11
There is more than 1 version of this model.
Page down to identify the version you have.