1. DL manuals
  2. Moen
  3. Plumbing Product
  4. 82009
  5. Installation Manual

Moen 82009 Installation Manual

Summary of 82009

  • Page 1

    Installation guide guía de instalación guide d’installation please contact moen first for installation help, missing or replacement parts (usa) 1-800-buy-moen (1-800-289-6636) mon - fri 8:00 am to 7:00 pm, eastern sat. 9:00 am to 3:00 pm eastern www.Moen.Com (canada) 1-800-465-6130 mon - fri 7:30 am...

  • Page 2

    2 parts list a. Shower arm flange b. Shower arm c. Shower head d. Flow director (must be installed) e. Valve body f. Wall tube escutcheon g. Cold handle h. Handle screw i. Handle cap j. Hot handle k. Tub spout l. Hot temp indicator (red) m. Cold temp indicator (blue) lista de piezas a. Bride de bras...

  • Page 3: 78"

    Ins972f - 8/16 3 if soldering copper tubing (cc) into valve (e) insert ½" copper tubing into the hot and cold water inlets and the shower riser and tub drop outlets. Then, go to step 5 si va a soldar tubería de cobre (cc) en la válvula (e) inserte el tubo de cobre de ½" en las entradas de agua fría ...

  • Page 4

    4 rotate the valve over as seen in step 2a. Haga girar la válvula por encima como se muestra en el paso 2a. Faire pivoter la soupape au-dessus, comme illustré à l’étape 2a. This valve (e) can be plumbed using threaded connections (ips). The water inlets, the outlets to the tub spout and to the showe...

  • Page 5

    Ins972f - 8/16 5 e 4a optional/opcional/optionnel 4b cc 5 go to vaya al paso aller À l'Étape slide wall tube escutcheons (f) over wall tubes. The cold handle (g) has a “c” stamped inside as shown and is to be installed on the right side. The hot handle (j) has a “h” stamped inside and is to be insta...

  • Page 6

    6 plastic shower ball: slide shower arm escutcheon (a) over shower arm (b). Remove any debris from the shower arm to ensure proper flow. Then, simply thread shower head (c) onto shower arm (b) by hand. Ensure the washer is inside shower head (c) to create the proper seal. Thread seal tape is not req...

  • Page 7: 11B

    Ins972f - 8/16 7 handle rotation correction water to the valve must be turned off for this adjustment 1. Remove handle cap, screw, and handle. 2. Remove brass cartridge nut and handle adapter. 3. Remove shorter part of handle extension, rotate 180 degrees and reinstall. 4. Reinstall all parts in rev...

  • Page 8

    Ins972f - 8/16 ©2016 moen incorporated moen incorporated 25300 al moen drive north olmsted, ohio 44070-8022 u.S.A. Moen inc. 2816 bristol circle oakville, ontario l6h 5s7 canada moen de mexico, s.A. De c.V. Carretera saltillo-monterrey km 14.7 ramos arizpe, coahuila mexico 25900 moen products have b...