Moen CAMELOT 22245 Specification
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 12/10
SINK DESCRIPTION
• Manufactured of 20 gauge stainless steel
• The large bowl is a minimum of 12" x 190" x 5-1/2"
• The sink ledge has two fixture mounting holes,
1-1/4" in diameter and 4" on center
• Includes 4904 bar faucet with a 2.2 GPM flow rate
• Has one 2” diameter SEALTITE recessed drain
• Soundshield undercoating maximizes sound
deadening and inhibits condensation
• Made in U.S.A.
• Includes all necessary mounting hardware
CUT OUT DIMENSIONS
• Cut out dimensions are 12-1/2" x 16-5/8", with a
5/16" corner radius. A tolerance of plus or minus
1/16" is acceptable
STANDARDS
• Third party certified to ASME A112.19.3 and all applicable
specifications referenced therein
•
Suitable for ADA compliant installation
WARRANTY
• Warranted for ten years against material or
manufacturing defects
CAMELOT®
Single Bowl Drop-In Sink with Faucet
Model: 22245
(K-1317-2-WF)
SINK OVERALL DIMENSION
COUNTERTOP CUT-OUT
BOWL
DIMENSION
CONTINUOUS
"U" CHANNEL
SINK
CLAMP
COUNTERTOP
SEALANT MATERIAL
6"
(152mm)
2-5/8" R.
TYP.
2"
(51mm)
1-1/4" DIA. TYP.
13"
(330mm)
WIDTH
5"
(127mm)
10"(254mm)
BOWL
5-1/2"
(165mm)
17-1/8"
(435mm)
LENGTH
1-1/2"
(38mm)
1-1/2"
(38mm)
1-1/2"
(38mm)
SEALTITE DRAIN
ASSEMBLY WITH
DROP IN BASKET
3-5/8"
(92mm)
12"
(304mm)
2"SEALTITE
DRAIN
5/16" R.
TYP.
Installation Detail
ADA
There is more than 1 version of this model.
Page down to identify the version you have.