Moffat BLUE SEAL EVOLUTION G518A-B Technical Data Sheet

Technical data sheet for

GAS COOKTOPS 1200mm

G518D-B, G518D-CB, G518D-LS, G518D-RB, 

G518C-B, G518C-CB, G518C-LS, G518C-RB,

G518B-B, G518B-CB, G518B-LS, G518B-RB, 

G518A-B, G518A-CB, G518A-LS, G518A-RB

  Heavy-duty construction

  28 MJ/hr open burners

  Flame failure standard

  Pilot burners optional

  300mm, 600mm, and 900mm griddle

  plate options

  Optional simmer plates

  3 models of base unit

  1 model of ventilated refrigeration base 

  with drawer/door options

  Rear rollers

  Stainless steel exterior

  Easy clean

  Easy service

  Fully modular

Overall Construction

Cooktop

• Welded hob with 1.5mm 304 stainless steel bull nose

• Side panels 1.2mm 304 stainless steel

• Splashback 1.2mm 304 stainless steel

• Vitreous enamelled control panel

• Aluminised steel internal construction

• Cast iron 28MJ/hr open burners with forged brass cap

• Vitreous enamelled cast iron potstands

• Vitreous enamelled open burner spill covers

• Cast iron simmer plates (optional extra)

• 12mm thick mild steel griddle plate

• 2.5mm 304 stainless steel griddle splash guards

• Stainless steel spill trays

Griddle sections are standard on RH side. Available on LH side and 

centres to order or by conversion.

Bench mount (supplied as –B model)

• Four 63mm dia. heavy-duty 1.2mm 304 stainless steel bench legs 

with adjustable feet

• Adjustable height 80mm – 105mm

Cabinet base (supplied as –CB model)

• Fully modular for match suite finish

• Double skin 0.9mm 304 stainless steel interior and exterior

• Optional GN 1/1 4 position racking kit (1 or 2 cabinet bays)

• Up to eight 65mm GN 1/1 capacity

• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with two 

adjustable feet at front and two rollers at rear

Leg stand (supplied as –LS model)

• Fully modular for matched suite finish

• Framed top for connection to Cooktop

• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with two 

adjustable feet at front and two rollers at rear

• Fully modular framed stand shelf with 0.9mm 304 stainless 

steel finish

• Shelf to top stainless steel backstop panel for convenience  

and rigidity

• Suitable for rear or through shelf gas connection to Cooktop

• Quick assembly design

Refrigerated base (supplied as –RB model)

• Self contained suite matched modular base

• Ventilated system with R134a refrigerant

• -2° to + 8°C temperature (Tropical Climate rated)

• Two GN 1/1 drawers and one door standard

• 100mm deep pan drawer capacity

• Heavy-duty European telescopic drawer guides

• Magnetic drawer gaskets (replaceable without tools)

• 50mm fully foamed CFC free insulation

• 304 stainless steel exterior and interior

• Anti-corrosion treated evaporator

• No condensate drain required

• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with 

adjustable feet

• Condensing unit removable through front of unit for service

• Easy clean interior

Controls

Cooktop

• Variable high to low controls to open burners

• Open burners flame failure standard with pilot burners optional

• Variable high to low controls to griddles

• Griddles standard with pilot, flame failure and piezo ignition

• Large easy use control knob - heat resistant reinforced

• Easy view control settings on knob

Refrigerated base

• Digital control electronic thermostat

• Automatic defrost

• Automatic evaporation of defrost water

• -2° to +8°C temperature range

Cleaning and Servicing

• All models with easy clean stainless steel external finish

• Lift off burner heads and vitreous enamelled burner spill covers

• Stainless steel spill trays under open burner and griddle sections

• Access to all parts from front of unit

• Refrigerated Base condenser removable through front of unit

G518D-LS