1. DL manuals
  2. N-Com
  3. Automobile Accessories
  4. Bluetooth Kit3 PLUS
  5. User Instructions And Safety

N-Com Bluetooth Kit3 PLUS User Instructions And Safety

Summary of Bluetooth Kit3 PLUS

  • Page 1

    Firmware version: 4.0x en user instructions and safety.

  • Page 2

    Congratulations on your purchase of an n-com product. N-com bluetooth kit3 plus was made using the most advanced technologies and the best materials. Long-running tests and thorough system development have allowed the highest audio quality to be achieved. For additional information about bluetooth k...

  • Page 3: Contents

    3 contents 1. Warnings and safety ____ 4 1.1.Road safety _________________ 4 1.2.Switching on the system in safe environments ____________________ 5 1.3.Interferences ________________ 5 1.4.Appropriate use ______________ 5 1.5.Qualified personnel ___________ 6 1.6.Accessories and batteries ______ 6 ...

  • Page 4

    4 1. Warnings and safety read this user manual carefully, as well as the user manuals for other n-com kits that you will be using with the n-com bluetooth kit3 plus. Read the simple rules listed below. Failure to comply with these rules may lead to dangerous situations. Caution: the product cannot b...

  • Page 5

    5 1.2. Switching on the system in safe environments when using the n-com system, comply with all limitations and instructions related to the use of cell phones. Do not turn on your cell phone or the n-com system whenever their use is forbidden or when the devices can cause interference or dangerous ...

  • Page 6

    6 provided in the product documentation. In case of doubt, please contact your local n-com dealer. Warning: listening to other equipment should not interfere with driving the vehicle, which must be the top priority at all times. Carry out all operations on the electronic equipment and on the n-com s...

  • Page 7

    7 do not throw out batteries together with household refuse. The batteries should be disposed of in compliance with local regulations do not wear the helmet while the battery is recharging. The helmet should never be left within the reach of unsupervised children in order to prevent damage to their ...

  • Page 8

    8 2. Content of the packaging the n-com bluetooth kit3 plus package contains: e-box bluetooth kit3 plus pc connection cable multimedia wire2 rechargeable battery battery charger.

  • Page 9

    9 3. Installation bluetooth kit3 plus can be installed on all nolan helmets pre-set for the n-com system. In order to use the n-com bluetooth kit3 plus system, the nolan helmet must be equipped with the basic kit2 (or basic kit), sold separately. Note: before using the n-com bluetooth kit3 plus syst...

  • Page 10

    10 4. Basic functions all n-com system functions are available through the operation of three pushbuttons: “ ”, “on” and “ ”. Every time the system is given a command, a special acoustic signal can be heard, which varies depending on the function being requested, or on the vocal command given. Thi...

  • Page 11

    11 menu functions base management of an external source connected via cable use of mobile phone/gps with bluetooth connection use of the intercom “rider–pillion passenger” or “universal intercom” listening to and management of bluetooth a2dp player radio listening to and management of fm radio use o...

  • Page 12

    12 the programme includes an on-line guide that explains how it works (after installing it on your pc, press f1 to display this guide). Warning: first, insert the jack connector into the helmet. Then the usb connector into the pc. 4.3. N-com app the n-com system is pre-set for connection to the “n-c...

  • Page 13

    13 5. Pairing up bluetooth devices in order for the bluetooth kit3 plus system to be connected to another bluetooth device, the latter needs to be first paired up with the n-com system. The pairing up procedure is the same for all bluetooth devices: mobile phones, mp3 bluetooth players, satellite na...

  • Page 14

    14 in case connection is not automatically initiated after a few seconds, you can connect from the bluetooth device or by pressing “on” for 4 seconds. 5.1. Affiliation reset function you can remove all affiliated devices from the system memory. This operation is not reversible; right after resetting...

  • Page 15

    15 6. Mobile phone functions answering a phone call briefly press any key when you hear the incoming call signal hanging up/rejecting a phone call press “on” and keep it pressed for about 2 seconds (until you hear the acoustic signal) voice call (if equipped) press “on” and keep it pressed for about...

  • Page 16

    16 7. Gps satellite navigator functions bluetooth kit3 plus is compatible with the most common satellite navigators for motorcycles. By connecting the n-com system to the gps, all instructions will be transferred to the helmet. Every time the navigator communicates instructions, the intercom via blu...

  • Page 17

    17 8. Stereo fm radio bluetooth kit3 plus is equipped with stereo fm radio with rds (radio data system) technology, which automatically selects the strongest signal available for the fm radio you want to listen to, regardless of your location. You can scroll through the band of frequencies using the...

  • Page 18

    18 9. Bluetooth a2dp music player you can listen to high quality music by connecting bluetooth kit3 plus to a device equipped with bluetooth a2dp (advanced audio distribution profile) protocol. The bluetooth kit3 plus system is also equipped with bluetooth avrcp (audio video remote control profile) ...

  • Page 19

    19 10. Audio devices with cable connection the range of n-com products offers various “multimedia wire” accessories for connection to external audio devices: mp3 players, i-pods, satellite navigators, gmrs and pmr radio and audio systems pre-fitted on motorcycles (mcs). To find out about all the ava...

  • Page 20

    20 11. N-com rider-passenger intercom mode in order to use bluetooth kit3 plus in wireless intercom mode, both helmets have to be equipped with a bluetooth kit. In order for two bluetooth kits to communicate with one another, they have to be paired up first. 11.1. Intercom affiliation 1. Make sure b...

  • Page 21

    21 12. N-com intercom via cable in order to use n-com bluetooth kit3 plus as intercom via cable, you need to use an intercom wire (sold separately) to connect the two helmets. Install the basic kit2 + bluetooth kit3 plus in the rider's helmet. Fit the pillion passenger’s helmet with basic kit2 (posi...

  • Page 22

    22 13. N-com bike-to-bike intercom the n-com bluetooth kit3 plus system is used for bike-to-bike communication up to a distance of about 500 m (open terrain, no obstacles). N.B.: the range and quality of the communication may very significantly depending on the presence of obstacles, weather conditi...

  • Page 23

    23 n.B.: if all the memory settings are free, helmet 2 will store helmet 1 in position a (see diagram in chapter 13.1). In case that setting is taken, the following one will be selected according to the sequence listed in the table. You can display the memory settings of your device (and check the n...

  • Page 24

    24 bike-to-bike intercom communication differs from the rider-pillion passenger kind for certain specific characteristics: the audio coming from an external source (connected via cable or bluetooth) is not shared with the helmet connected in bike-to-bike intercom mode. The audio coming from the radi...

  • Page 25

    25 14. “universal intercom” the n-com bluetooth kit3 plus system can be connected via bluetooth to intercom systems of other brands, thanks to the universal intercom function. 14.1. Pairing up the universal intercom to pair up an n-com system and an intercom of another brand (from now on called inte...

  • Page 26

    26 n.B.: the n-com systems keeps an active connection to a mobile phone or to a gps even during bluetooth communication with other intercom systems. It may be that the intercom system hooked up to the n-com does not allow for simultaneous connection to a mobile phone. 14.3. Universal intercom bike-t...

  • Page 27

    27 15. Battery before using the n-com device for the first time, recharge the battery completely for at least 10 hours. To obtain best performances from the battery, it is recommended to completely recharge the battery the first few times. Afterwards, you can recharge the battery for shorter periods...

  • Page 28

    28 16. Summary table of controls button on on pressure brief long brief long brief long brief long turning on x (2s) turning off x (4s) increase volume x decrease volume x b a s ic f u n c tio n s scroll menu (base, radio, bike to bike) x (2s) answer phone call x x x voice call x (4s) hang up/reject...

  • Page 29

    29 button on on pressure brief long brief long brief long brief long activate audio via cable x (2s) deactivate audio via cable x (2s) connect a2dp device x (2s) disconnect a2pd device x (2s) play music (play) x (2s) pause function (pause) x (2s) next track (forward) x (4s) activate n-com intercom o...

  • Page 30

    30 button on on pressure brief long brief long brief long brief long answer call bike-to- bike x x x intercom swap (from bike-to-bike to rider-pillion passenger)* x x connection to bike 1 x (2s) connection to bike 2 x (2s) connection to bike 3 x (4s) b ik e t o b ik e m e n u connection to bike 4 x ...

  • Page 31

    31 17. Limited warranty with this limited warranty certificate, nolangroup warrants this product to be free from defects in material and workmanship at the time of its original purchase by the buyer. We invite you to: - read the cautions pertaining to safety and proper use. - read the warranty terms...

  • Page 32

    32  moreover, the warranty does not cover product defects caused by fortuitous events, modifications or adjustments, causes of force majeur or damages deriving from the product coming in contact with liquids.  the internal helmet components are not and cannot be waterproof. Consequently, any impro...

  • Page 33

    33 name and stamp of the authorized dealer. Product purchase date. Buyer’s name and address. Nolangroup reserves itself the right to not carry out repairs under warranty if the aforementioned information is removed or modified after the original purchase of the product from the dealer. 17.4. Procedu...

  • Page 34

    34 to lost profits or commercial damages, to the full extent those damages can be disclaimed by the law. Nolangroup reserves itself the right to modify, at any time and without advance notice, the product characteristics, functions, compatibility and software. Some countries do not allow the exclusi...

  • Page 35

    18. Warranty registration form product name: bluetooth kit3 plus identification code buyer’s information name last name address phone e-mail dealer’s stamp date of purchase.

  • Page 36

    Printed on recycled paper bluetooth kit3 plus - 25/07/2013 13:50:00