N-Tron 7010TX Technical Instructions - Setting Up A Single Ip

Revision 2010-11-15                                                                                                                                                                                                     

Page 17 of 33

Setting up a Single IP  

  IP address allocation is Static and is based on matching Option 61 information received from 

a Client.  The same IP address will be given each time to a specific Client. 

Basic configuration using Option 61 or MAC Address 

Topology: 

DHCP

Client

Example: 

  In this example connections can be made to any port on the server or on a switch 

connected to the server.   

  A mapping is created that associates an IP address with the MAC address of the client.   

  The mapping IP address 192.168.2.110 will be given to the client with the MAC address 

00:07:AF:FF:C8:80, that is requesting an IP.   

Setup: 

  Click on: DHCP / Server / Setup IP Maps.  See Figure: Menu_1 

  Click on: Single IP. 

  Reference Figure: Option61_1 

  Enter the IP address to be offered to the Client. 

  Enter the MAC address of the Client. 

  Click Update when finished. 

Figure: Option61_1