Service information to obtain consistent performance over the lifetime of your nacecare equipment, read through these instructions and save them for future reference. The model and serial number can be found on the nameplate located on the side of the handle. If you require service, or need to make ...
Grounding instructions brush and pad driver installation this appliance must be grounded. If it should malfunction or break down, the ground reduces the risk of electric shock. This machine is supplied with a 3 prong grounded electrical plug and can only be used with a 3 prong grounded electrical ou...
Adjustments drive belt adjustments (na1520/2020 only) note: disconnect power cord from electrical outlet before adjusting drive belt tension 1. Loosen the bolts holding the drive motor to the frame, do not remove them 2. Turn the 2 screws at the rear of the frame until the belt is tight 3. Test the ...
