Nacecare Jet Vac 2000 Operating Instructions

NACECARE SOLUTIONS

Jet Vac 2000

SI Specification

NOTE:    As with all electrical equipment, care and attention must be exercised at all times

during its use, in addition to ensuring that routine and preventative maintenance is carried out

periodically in order to ensure its safe operation.  In particular the electrical supply cable and

flexible hose should be regularly inspected by a competent person and immediate action taken to

rectify any faults found.  Failure to carry out maintenance as necessary, including replacement of

parts to the correct standard, could render the equipment unsafe and the manufacturer can accept

no responsibility in this respect.

_____________________________________________________

MACHINE OPERATION

Please see the enclosed machine and accessory drawings to identify components mentioned

below.

A)

ELECTRICAL SUPPLY

Before operating the machine, make sure that the electrical requirements are met.  The Jet Vac

2000 is designed to operate on 115V power supply fused with a 15 amp breaker.  Insert the plug

(21) into a 115V grounded outlet.

B)

FILLING WITH WATER

Unscrew the valve cap (22) and add water using the fill bottle provided.  When the boiler is full,

the valve on the fill bottle will activate, preventing overfilling.

WARNING: Do not use any chemical agents in the boiler.  This could cause blockages and

deterioration of the machine and accessories rendering the product warranty null and void.