1. DL manuals
  2. Nacecare
  3. Vacuum Cleaner
  4. TP12QX
  5. Owner's Manual

Nacecare TP12QX Owner's Manual

Summary of TP12QX

  • Page 1

    Owners manual for tp4x, tp8x, tp12qx, and tp18sx prior to using this machine, make sure that you have read, and understand the safety and operating instructions for this machine. Nacecare solutions 1205 britannia road east mississauga, ontario, canada l4w 1c7 toll free: 1 800 387 3210 toll free fax:...

  • Page 2

    Safety instructions (read carefully) every electrical device must be used for its particular function only, respecting the manufacturer’s instructions. Failure to adhere to these instructions could result in serious bodily injury to the operator (shock, electrocution, etc.). Please read the followin...

  • Page 3

    Setup 1. Remove the 2 spring clips holding the upper tank to the lower tank (tp4x, and tp8x only) 2. Fill the solution tank with cold or warm water through the filling hole. Add non-foaming chemical to the solution tank, diluting it according to the manufacturers specifications. Attention: wool carp...

  • Page 4

    2. Connect the vacuum hose to the machine as shown in fig 1 (tp12qx and tp18sx have the connections in the rear of the machine). 3. Connect the solution hose to the machine as shown in fig 2 4. Connect the wand/hand tool to the end of the hose as shown in fig 3 fig 1 fig 2 fig 3 5. Plug the machine ...

  • Page 5

    Using the machine for regular carpet maintenance you should only pre-spray heavily soiled areas. With the vacuum and pump in the “on” position and the wand or hand tool attached, pull the solution valve to spray the water and slowly pull the wand/hand tool back to vacuum the dirty water into the rec...