® owner’s manual c 268 stereo power amplifier english fr anÇ ais esp aÑol it aliano deut sch nederl ands svensk a РУ ССКИЙ.
Save these instructions for later use. Follow all warnings and instructions marked on the audio equipment. 1 read instructions - all the safety and operating instructions should be read before the product is operated. 2 retain instructions - the safety and operating instructions should be retained f...
19 damage requiring service - unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) when the power-supply cord or plug is damaged. B) if liquid has been spilled, or objects have fallen into the product. C) if the product has be...
Notes on environmental protection at the end of its useful life, this product must not be disposed of with regular household waste but must be returned to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user’s manual and packaging, point this o...
Quick start refer to the supplied c 268 quick setup guide for basic instructions in setting up your new nad c 268. The following guidelines must be observed when setting up your c 268. 1 before setting up or making connections, ensure that the c 268 and other devices to be connected to c 268 are unp...
1 standby button • press standby button to switch on the c 268 from standby mode. The power indicator will change from amber to blue color. • pressing standby button again switches back c 268 to standby mode. The power indicator will change from blue to amber color. • the standby button cannot activ...
4 balanced • connect xlr audio source to these connectors. Ensure that proper pin configurations are followed – pin 1: ground, pin 2: positive (signal live) and pin 3: negative (signal return). 5 select use select switch to choose which audio input will be the active source. • select single-ended au...
Identification of controls rear panel 13 bridge mode the c 268 amplifier can be configured to be mono (bridge mode), more than doubling its output power. This way, the c 268 can be used as part of a high power stereo or home-theatre system, by connecting additional power amplifiers. • in bridged mod...
Audio specifications analog audio input/line out thd (20 hz – 20 khz) signal-to-noise ratio >110 db (ihf; 20 hz – 20 khz, ref. 2v out) channel separation >90 db (1 khz) >75 db (10 khz) input impedance (r and c) single-ended: 33 kohms + 220 pf balanced: 10 kohms +20 pf maximum input signal >7.0 vrms ...
Www.Nadelectronics.Com ©2017 nad electronics international a division of lenbrook industries limited all rights reserved. Nad and the nad logo are trademarks of nad electronics international, a division of lenbrook industries limited. No part of this publication may be reproduced, stored or transmit...
