- DL manuals
- NAD
- Amplifier
- D 7050
- Owner's Manual
NAD D 7050 Owner's Manual
Summary of D 7050
Page 1
? d 7050 direct digital network amplifier english por tuguÊs fr anÇ ais esp aÑol it aliano deut sch nederl ands svensk a РУ ССКИЙ owner’s manual.
Page 2
Save these instructions for later use. Follow all warnings and instructions marked on the audio equipment. 1 read instructions - all the safety and operating instructions should be read before the product is operated. 2 retain instructions - the safety and operating instructions should be retained f...
Page 3
25 battery disposal - when disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country or area. Batteries (battery pack or batteries installed) must not be exposed to excessive heat such as sunshine, fire or the like...
Page 4
Unpacking and setup what’s in the box packed with your d 7050 you will find: • detachable mains power cord • remote control with 3v cr2025 battery • eight pieces of dome-shaped feet • quick setup guide save the packaging please save the box and all the packaging in which your d 7050 arrived. Should ...
Page 5
Identification of controls 1 (standby) • with the corresponding end of the mains power cord connected to the ac mains input of the d 7050 and the plug connected to a mains power source, press (standby) to switch on the d 7050 from standby mode. The standby indicator will turn from amber to bright/wh...
Page 6
10 lan • lan connection must be setup for wired connection to be established. Set up a wired ethernet broadband router with broadband internet connection. Your router or home network should have a built-in dhcp server to consummate the connection. • using a standard straight-through ethernet cable (...
Page 7
Nad d 7050 app a d 7050 app can be downloaded at the itunes app store. This app includes d 7050 basic remote control functions as well as configurable features. Descriptions of the selectable features can be viewed by selecting “i” in the app screen whenever available from any of the menu settings. ...
Page 8
Important notes about power save settings • if d 7050 is switched to standby mode with power save set to on, the d 7050 will go to demo mode. At this condition, the d 7050 cannot be switched back to operating mode using the d 7050 app. Press (standby) switch or on from the remote control to switch d...
Page 9
Battery insertion procedure 1 insert a hooked tip into the battery door release hole. 2 slide out the battery tray. 3 place the supplied cr2025 battery into the tray. Ensure the "+" symbol is facing upwards. 4 slide the tray back until it clicks into place. Remote control 1 on: switch d 7050 from st...
Page 10
Connect airplay airplay lets you stream music from your airplay-enabled device to the d 7050. The airplay-enabled device and the d 7050 must be in the same network to send and receive streaming audio with airplay. This connection could be wired, using ethernet cable, or wireless. Setting up network ...
Page 11
4 select your local network from the drop down ssid list - nadlab (wpa2 ccmp) in this example. 5 type the wpa passphrase (if it is password protected) of your local network in the field provided and then select go to join in. 6 a warning notice will pop-up. Select ok to save the new settings. The fl...
Page 12
Dlna the digital living network alliance (dlna) is a cross-industry organization of consumer electronics, computing industry and mobile device companies. Dlna provides consumers with easy sharing of digital media through a wired or wireless network in the home. Playback shared contents the d7050 sup...
Page 13
Feet installation guide the dome-shaped feet are supplied for optional installation. There are two ways of installing the feet as per suggested methods below. You may generate a template for proper placement of the feet. Note ensure that with the feet installed, the d 7050 is stable, balanced and wi...
Page 14
Audio specifications rated power at 4 ohms 50w signal-to-noise ratio (a-weighted) ≥ 90 db crosstalk (1 khz) ≥ 85db crosstalk (10 khz) ≥ 70 db frequency response (20 hz – 20 khz) 0 db to - 0.3 db total harmonic distortion ≤ 0.004 % imd (smpte) 0.02 % imd (ccif) 0.003 % general specifications standby ...
Page 15
15 english por tuguÊs fr anÇ ais esp aÑol it aliano deut sch nederl ands svensk a РУ ССКИЙ.
Page 16
Www.Nadelectronics.Com ©2014 nad electronics international a division of lenbrook industries limited all rights reserved. Nad and the nad logo are trademarks of nad electronics international, a division of lenbrook industries limited. No part of this publication may be reproduced, stored or transmit...