English fr anÇ ais esp aÑol it aliano deut sch nederl ands svensk a РУ ССКИЙ ® owner’s manual m22 stereo power amplifier.
Save these instructions for later use. Follow all warnings and instructions marked on the audio equipment. 1 read instructions - all the safety and operating instructions should be read before the product is operated. 2 retain instructions - the safety and operating instructions should be retained f...
19 damage requiring service - unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) when the power-supply cord or plug is damaged. B) if liquid has been spilled, or objects have fallen into the product. C) if the product has be...
Notes on environmental protection at the end of its useful life, this product must not be disposed of with regular household waste but must be returned to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user’s manual and packaging, point this o...
Introduction getting started what’s in the box packed with your m22 you will find • a detachable mains power cord • four pieces of magnetic feet • usb flash drive • cleaning cloth • quick setup guide note connect supplied usb flash drive to any compatible device to view the m22 owner’s manual and qu...
1 o (standby) • press o(standby)button for the m22 to be switched on from standby mode. The power indicator will turn from amber to bright/ white color. • press and hold o(standby)button until m22 switches back to standby mode. The power indicator will illuminate to amber color at standby mode. • th...
1 balanced • use the balanced analog audio input of the m22 if the external source to be connected has balanced audio output. Superior audio quality is ensured with the distinctive noise reduction capability of balanced connection with xlr jacks. • with balanced as the selected audio input, ensure t...
5 power • supply the ac mains power to the m22. • when the power switch is set to on position, the m22 goes to standby mode as shown by the amber status condition of the power indicator. Press o(standby) button to switch on the m22 from standby mode. • if you intend not to use the m22 for long perio...
Condition possible causes possible solutions no power. • mains power cord unplugged from mains power source or from m22’s ac mains input. • connect the mains power cord to m22’s ac mains input and then plug into a mains power source. • power switch is off. • switch on the power switch. • m22 at stan...
Overall specifications continuous output power into 8 ohms and 4 ohms ≥ 250 w (ref. Rated thd, 20 hz – 20 khz, all channels driven) rated thd (250 mw to rated power, ccif imd, dim 100) ≤0.005 % (ref. 20 hz - 20 khz) ihf dynamic power 8 ohms : 355 w 4 ohms :640 w 2 ohms : 620 w damping factor >800 (r...
11 english fr anÇ ais esp aÑol it aliano deut sch nederl ands svensk a РУ ССКИЙ.
Www.Nadelectronics.Com ©2014 nad electronics international a division of lenbrook industries limited all rights reserved. Nad and the nad logo are trademarks of nad electronics international, a division of lenbrook industries limited. No part of this publication may be reproduced, stored or transmit...
