1. DL manuals
  2. NAD
  3. Blu-ray Player
  4. T 567
  5. Owner's Manual

NAD T 567 Owner's Manual

Summary of T 567

  • Page 1

    English por tuguÊs fr anÇ ais esp aÑol it aliano deut sch nederl ands svensk a РУ ССКИЙ ® owner’s manual t567 blu-ray disc™ player.

  • Page 2

    Save these instructions for later use. Follow all warnings and instructions marked on the audio equipment. 1 read instructions - all the safety and operating instructions should be read before the product is operated. 2 retain instructions - the safety and operating instructions should be retained f...

  • Page 3

    20 replacement parts - when replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. 21 safety check ...

  • Page 4

    European union notice for wireless product products bearing the ce marking comply with the r&tte directive (1999/5/ec), emc directive (2004/108/ec) and the low directive (2006/95/ec) issued by the commission of the european community. Indoor use only. Notes on environmental protection at the end of ...

  • Page 5

    Introduction table of contents thank you for choosing nad. The t 567 blu-ray disc player continues nad’s penchant for performance with the exciting blu-ray disc format. The t 567 is nad’s answer to customers’ quest for a fast loading and powerful blu-ray disc player with superb array of features. Th...

  • Page 6

    Introduction getting started unpacking and setup what’s in the box packed with your t 567 you will find: • the br 2 remote control with 2 (two) aa batteries • a detachable ac power cord • set of rubber feet • this owner’s manual version in cd-rom save the packaging please save the box and all of the...

  • Page 7

    Introduction getting started region management information the t 567 is designed and manufactured to respond to the region management information that is recorded on a dvd disc or blu-ray disc. If the region or bd code described on the disc does not correspond to the region or bd code shown on the t...

  • Page 8

    Identification of controls front panel 1 standby button • manually open the flip cover to access this button. • press this button to switch on the t 567. The display window will illuminate. If there is disc loaded, the display window will show the playback time status of the disc. If there is no dis...

  • Page 9

    Identification of controls front panel 9 7/8 , 9/0 , enter • press 0 to skip forward or 9 to skip backward a track, file or chapter. • press 7/8 to scan fast-forward or fast-reverse during playback. Each time the button is pressed, the speed increases until the maximum level is reached. The scanning...

  • Page 10

    1 ac mains input • the t 567 comes supplied with a separate ac mains cable. • before connecting the cable to a live wall socket, ensure first that it is firmly connected to the t 567’s ac mains input socket. • always disconnect the ac mains cable plug from the live wall socket first, before disconne...

  • Page 11

    1 on: switch on t 567 from standby mode. 2 off: switch t 567 to standby mode. 3 audio: select an audio language. Subtitle: select a subtitle language. Zoom: enlarge video image. Picture: display or exit the picture mode menu. 4 0-9 number buttons: select numbered items in a menu. 5 rpt: repeat track...

  • Page 12

    You may operate the t 567 from its front panel or via the br 2 remote control. Since the remote control will be the primary controller for most cases, we will focus on remote-controlled operations. Be sure also to read the section, “identification of controls - front panel”. Using the home menu from...

  • Page 13

    Resolution the t 567 provides several video output resolutions for the hdmi out and component video out jacks. Resolution can be changed via the “resolution” option in the display setup menu or by toggling the [res] button of the br 2 remote control. The t 567 must be at stop mode when br 2’s [res] ...

  • Page 14

    Language setup menu display menu select a language for the setup menu and on-screen display. Disc menu/audio/subtitle select the language you prefer for the audio track (disc audio), subtitles and the disc menu. Depending on the media, only those disc audio, disc subtitle and disc menu languages rec...

  • Page 15

    Password when you access lock setup menu for the first time, it is advised that you setup first your password. 1 while at “password” line menu, press [s] or [enter] to select “new” option. 2 input your desired 4-digit password code. 3 enter again the 4-digit password code for verification. 4 with “o...

  • Page 16

    2 a menu prompts you to select “yes” to reset any existing connection or “no” to retain current connection. Select “yes”. Use [a/s/d/f] to configure your connection with below osd. Static: select to set manually the ip address, subnet mask, gateway and consequently the dns server settings. Dynamic: ...

  • Page 17

    Connection status selecting “connection status” will test and consequently display the status of your network connection. The status of your network connection will be displayed like “success” (as in above osd) or “fail”. Notes on network connection • nad is not responsible for any malfunction of th...

  • Page 18

    Playing blu-ray 3d disc the t 567 can playback blu-ray 3d discs. The following requirements must be met to allow blu-ray 3d disc playback. • your tv must be 3d-capable and has hdmi 1.4 input(s). • connect the t 567’s hdmi out to the hdmi input of your 3d-capable tv using an hdmi cable (type a, high ...

  • Page 19

    Audio direct recording the t 567 has the added feature of recording a desired track or all tracks of an audio cd to a connected usb device. 1 follow above procedure about playing audio cd. 2 press br 2’s [disp] button during playback or stop mode – the “cd recording” prompt appears. Highlight “cd re...

  • Page 20

    Operation using the t 567 - features viewing a photo file the t 567 allows the playback or viewing of photo files. 1 load the applicable disc or connect usb containing files. Select “photo” from the “home” menu. Press [enter]. 2 a list of folders or files are shown at the osd. 3 use the br 2’s [a/s/...

  • Page 21

    Entering a network user id and the password a network user id and a password maybe required to access a shared folder. 1 a keyboard menu appears automatically if a network user id and password are required. 2 in the virtual keyboard, use [a/s/d/f] to select a character, then press [enter] to confirm...

  • Page 22

    Adjusting the picture mode select the video quality mode during playback. You can adjust various options such as contrast, brightness, sharpness, etc. 1 press br 2’s [picture] button during playback of a bd, dvd or movie file. The “picture mode” menu appears on the screen. 2 use [d/f] to select a pi...

  • Page 23

    Depending on the media, the following basic function controls of the t 567 can be accessed directly using the br 2 remote control. Audio the audio button will allow one to switch the audio language or format only if the media supports the audio button feature. Press [audio] repeatedly to select desi...

  • Page 24

    Marker, search, clear use the [marker] button to selectively mark a scene that you wish to playback. Enter a marker press [marker] at the desired point on the disc. The marker icon appears on the screen briefly. You can enter up to nine markers. Recall or clear a marker scene press [search] and the ...

  • Page 25

    Resolution settings playback of unprotected media video output resolution hdmi out component video out hdmi connected hdmi disconnected 480i/576i 480p/576p 480i/576i 480i/576i 480p/576p 480p/576p 480p/576p 480p/576p 720p 720p 720p 720p 1080i 1080i 1080i 1080i 1080p/24hz mode 1080p/24hz mode 480i/576...

  • Page 26

    Reference language code list use this list to input your desired language for the following settings: disc audio/disc subtitle/disc menu language. Language code abkhazian 6566 afar 6565 afrikaans 6570 albanian 8381 ameharic 6577 arabic 6582 armenian 7289 assamese 6583 aymara 6588 azerbaijani 6590 ba...

  • Page 27

    Reference area code enter the appropriate code number for setting up the “area code”. Code country af afghanistan al albania dz algeria as american samoa ad andorra ao angola ai anguilla aq antarctica ag antigua and barbuda ar argentina am armenia aw aruba au australia at austria az azerbaidjan bs b...

  • Page 28

    Reference troubleshooting condition possible causes possible solutions no power. • the power cord is disconnected. • plug the power cord into the wall outlet securely. The power is on, but the t 567 does not work. • no disc is inserted. • insert a disc. No picture. • the tv is not set to receive vid...

  • Page 29

    Reference specifications system signal system auto/ntsc/pal (230v version model only) ntsc (120v version model only) laser semiconductor laser frequency response ±2db (ref. 0db 20 hz – 20 khz) dynamic range >95 db total harmonic distortion lan port ethernet jack, 10 base-t/100 base-tx wireless lan (...

  • Page 30

    Www .Nadelectronics .Com ©2011 nad electronics international a division of lenbrook industries limited all rights reserved. Nad and the nad logo are trademarks of nad electronics international, a division of lenbrook industries limited. No part of this publication may be reproduced, stored or transm...