NAD T773 ADDENDUM Owner's Manual - page 15
1 5
1 5
1 5
1 5
1 5
ENGLISH
The T 773 A/V Receiver employs a simple, self-explanatory system of on-screen display "menus" that will
appear on the connected video monitor/TV. These are required during the setup process (and are useful in
day-to-day operation), so be sure to connect the monitor/TV before proceeding with setup.
NOTE: The on-screen displays are carried on both the S-Video and composite MONITOR OUT jacks, but are
not incorporated into the component-video output.
Press any of the HTR 2 remote's central cursor keys ([
], [
], [
], [
], and [Enter]) to display the T
773’s main
connections.
NOTE: The OSD does not appear on the T 773's component-video output, nor does it appear on the VIDEO
3 and 4 record-outputs; these are for recording, not monitoring.
NA
NA
NA
NA
NAVIGA
VIGA
VIGA
VIGA
VIGATING THE OSD AND MAKING CHANGES
TING THE OSD AND MAKING CHANGES
TING THE OSD AND MAKING CHANGES
TING THE OSD AND MAKING CHANGES
TING THE OSD AND MAKING CHANGES
Use the HTR 2 remote's [
/
] keys to move up or down among the Setup menu's list of items; use [Enter]
to select a menu item, and use [
/
] to change the parameter-value (setting) of any item. Selecting the
memory; selecting
changes made on the previous menu. Selecting
retaining parameter-value changes, if any, made previously.
The T 773 is equipped with nine configurable and nameable inputs: six audio-video inputs labeled DVD, SAT,
VCR, and VIDEO 4-6 (including VIDEO 6 on the front panel), and three audio-only inputs labeled CD, DISC
and EXT 7.1. These are flexibly configurable and nameable: For each labeled video input-jack position (DVD,
SAT, VCR, VIDEO 4-6) as displayed on the
assign: an analog audio input selected on the