Powered mixer mpm 480 4-channel powered mixer owner’s manual digital echo effect echo level echo level echo level echo level echo vol repeat.
2 mpm 480 4-channel powered mixer the rugged mpm 480 is ideal for many applications and includes a mixer, equalizer, digital effects unit and power amp–all in a lightweight, compact, portable and simple-to- operate unit. • 4 mono inputs, both balanced xlr mic in (with 15 v phantom power) and 1/4" un...
Warning 3 important safety instructions when using this electronic device, basic precautions should always be taken, including the following: 1. Read all instructions before using the product. 2. Do not use this product near water (e.G., near a bathtub, washbowl, kitchen sink, in a wet basement, or ...
Front panel note: 1 through 6 below are referenced to channel 1. The other 3 channels are identical. 1. Line input 1/4" (6.3mm) jack for a mono signal line level input 2. Channel volume control adjusts the channel output level 3. Treble control adjusts the amount of treble in the signal with cut/boo...
Rear panel 14. Send jack 1/4"/6.3mm ts phone jack. Connects the mpm 480 to the input of the external effects unit. The send/return effects loop utilizes the signal from the master mixer and is before the amplifier. Normally, with no plug in the send jack, this master signal is routed straight throug...
Output power: 80 w music peak power at 8 Ω , 100 w at 4 Ω , each speaker output frequency response: 30 hz - 13 khz +/-3 db total harmonic distortion (thd) + noise: inputs (max. Sensitivity/impedance): 4 x mic: 6 mv / 1 k Ω 4 x line: 60 mv / 15 k Ω 1 x return: 800 mv / 15 k Ω 2 x cd/tape: 300 mv / 25...
Nady systems, inc. • 6701 shellmound street, emeryville, ca 94608 tel: 510.652.2411 • fax: 510.652.5075 • www.Nadywireless.Com service for your nady audio product (u.S.) should your nady audio product require service, please contact the nady service department via telephone at (510) 652-2411 or e-ma...
