Processor mse-100a multiband sound enhancement processor o w n e r ’ s m a n u a l.
Mse-100a multiband sound enhancement processor • professional multiband enhancer/exciter for all applications provides a subjective loudening of the audio and improves intelligibility, bass punch, pres- ence and transparency and reduces listening fatigue • variable sound processing circuitry for sim...
Warning important safety instructions when using this electronic device, basic precautions should always be taken, including the following: 1. Read all instructions before using the product. 2. Do not use this product near water (e.G., near a bathtub, washbowl, kitchen sink, in a wet basement, or ne...
In the last two decades, sound enhancement systems such as enhancers, exciters, psycho-acoustic processors etc. Have become an indispensable aid in the studio and have found widespread application in almost all film, broadcast and record- ing productions as well as in p.A. And sound reinforcement sy...
1. Power switch with led indicator this switches the ac power on or off. The integrated led will light to indicate power on. Note: in order to avoid possible undesired noise transients in a live sound reinforcement application, switch on the power to your mse-100a before switching on the amplifi- ca...
10. Inputs the mse-100a is equipped with both 1/4” (6.3mm) trs and xlr audio input jacks. These can be used for either bal- anced or unbalanced operation as follows: • unbalanced use of mono 1/4” plugs: tip = signal, sleeve = ground / shield. • balanced use of trs stereo 1/4” plugs: tip = hot (+), r...
8 applications basic settings we recommend setting the controls as indicated in the fol- lowing three sections. This will give you a better idea of the switch and control functions: 1. Set the mse-100a channel (1 or 2) to bypass mode (the mode switch out and the red led lit). Set the low mix and the...
9 applications enhancing the sound of tape duplications even under the most favorable of conditions, presence, liveliness and transparency of the program material will suffer during each copying process. These losses are par- ticularly obvious when copying cassettes while simultane- ously using a no...
10 applications note: if the p.A. Speakers are operated in mono, the second channel of the mse-100a can be used for another application. Enhancing the sound of monitor systems the mse-100a can be effectively used to improve the sound of stage monitor systems. Here intelligibility and transparency ar...
Nady systems, inc. • 6701 shellmound street, emeryville, ca 94608 tel: 510.652.2411 • fax: 510.652.5075 • www.Nady.Com service for your nady audio product (u.S.) should your nady audio product require service, please contact the nady service department via tele- phone at (510) 652-2411, or e-mail at...
