1. DL manuals
  2. Nady Audio
  3. Music Mixer
  4. MXE-612
  5. Owner's Manual

Nady Audio MXE-612 Owner's Manual

Manual is about: Nady 6 ChannelMic/LineMixer with Internal DSP Effects OWNER'S MANUAL MXE-612

Summary of MXE-612

  • Page 1

    Mxe-612 mixers 6 channel mic/line mixer with internal dsp effects owner’s manual.

  • Page 2: Table of Contents

    Mxe-612 6 channel mic/line mixer with internal dsp effects date of purchase ____________________________________ dealer’s name ______________________________________ city _______________________________________________ state _____________________ zip _____________________ model # ___________________...

  • Page 3: Warning

    Important safety instructions warning attention : risque de choc electrique ne pas ouvrir an equilateral triangle enclosing a lightening flash/arrowhead symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure which may be of sufficient m...

  • Page 4: Features

    4 features the mxe-612 is compact, versatile console or rackmountable mixers with 16 built-in selectable dsp echo and reverb effects that is ideal for any small venue live sound reinforcement applications where ultimate performance, advanced features, and affordability are needed. • superb performan...

  • Page 5: Installation

    Installation 5 to ensure years of enjoyment from your nady audio mxe-612 mixing console, please read and understand this manual thoroughly before using the unit. 1. Inspection your nady audio mxe-612 was carefully packed at the factory in packaging designed to protect the units in shipment. Before i...

  • Page 6: Controls and Connections

    Controls and connections 6 (1) (2) (3) (4) (5) (6) (7) (8) 1. Mono input section (1) mic input the mic input is an electronically balanced xlr type designed to accept signals from any balanced low impedance (low z) microphone. To accommodate condenser microphones, this input is also equipped with +4...

  • Page 7: Controls and Connections

    Controls and connections 7 (4) equalizer controls all mono input channels are fitted with a three-band eq. All three bands have up to 15 db of cut and boost, with a center detent for "off". The frequency response is flat when all three eq knobs are in the center detent position. The upper and lower ...

  • Page 8: Controls and Connections

    Controls and connections 8 (13a) 2. Stereo input section (13a) l (mono) line input on stereo input channels 3-6, the 1/4" line inputs are designed for stereo or mono line-level signals such as those from keyboards, drum machines, cd players, tape decks, or samplers. However, these inputs can also be...

  • Page 9: Controls and Connections

    Controls and connections 9 3. Master section a. Aux sends/returns function and operation (9) stereo aux returns (left/mono, right) (18) aux return control the aux return jacks are the mono or stereo returns for aux send. If you connect a signal to the left/mono return jack only, the aux return will ...

  • Page 10: Controls and Connections

    10 the output level routed to the stereo outputs and rec outputs is determined ultimately by the setting of the master mix gain control (29). The master mix (signal on the master bus) is the sum of the signals routed from all the channels and also the inputs from the aux return bus and the tape inpu...

  • Page 11: Controls and Connections

    Either direction through the 16 presets. The numeric effects display (27) will indicate which of the 16 effect presets has been selected. The dsp processes the signal on the effects bus, which is the sum of the 4 mono and 8 stereo channel inputs controlled by the eff control (5). The effect send con...

  • Page 12: Connections

    Connections 12 this nady audio mixer uses 4 different types of audio connectors for the various input/output connections: (1) xlr balanced; (2) 1/4” trs phone jacks for balanced, unbalanced, stereo, or in/out inserts; (3) 1/4” ts unbalanced; (4) rca pin unbalanced figures 1. Balanced xlr input/outpu...

  • Page 13: Specifications

    Specifications 1. Input section 2. Output section the specifications above are correct at the time of printing of this manual. For improvement purposes, all specifications for this unit, including design and apperance, are subject to change without prior notice. 13 3. Frequency response any input to...

  • Page 14: Block Diagram

    Block diagram 14.

  • Page 15

    Service for your nady audio product (u.S.) should your nady audio product require service, please contact the nady service department via telephone at (510) 652-2411, or e-mail at service@nady.Com. (international) for service, please contact the nady audio distributor in your country through the dea...