Summary of SPM 6600
Page 2: Table of Contents
Spm series stereo powered mixer with internal dsp effects date of purchase ____________________________________ dealer’s name ______________________________________ city _______________________________________________ state _____________________ zip _____________________ model # ____________________...
Page 3: Warning
Important safety instructions warning attention : risque de choc electrique ne pas ouvrir an equilateral triangle enclosing a lightening flash/arrowhead symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure which may be of sufficient m...
Page 4: Features
4 features offering top-of-the-line performance, features, ease of operating flexibility, and rugged construction for long-life reliability, the spm series is the best choices available in stereo powered mixers. • spm 6600 — 6 balanced or unbalanced xlr mic inputs and 6 balanced or unbalanced 1/4" t...
Page 5: Installation
Installation 5 to ensure years of enjoyment from your nady audio spm 6600/8600 powered mixer, please read and understand this manual thoroughly before using the unit. 1. Inspection your nady audio spm 6600/8600 was carefully packed at the factory in packaging designed to protect the units in shipmen...
Page 6: Controls and Connections
Controls and connections 6 (1) (2) (3) (1) pan control the channel pan positions the output of the channel in the stereo field of the master mix. Its constant-power design ensures there are no level discrepancies whether a signal is hard-panned l or r, center-stage, or somewhere in-between. (2) leve...
Page 7: Controls and Connections
Controls and connections 7 [note: always reset a channel’s input gain (or external devices’ output level) after altering the amount of mixer equalization cut or boost applied.] the key to successful equalization is to avoid excess. Too much equalization on the input channels will result in a mix tha...
Page 8: Controls and Connections
Controls and connections 8 (11) l and r led vu meter this will display the relative output level of the left and right main pwr amps mode (25) in stereo and bridge mode. It will also display the relative output level of the pwr amps mode (25) in the main/monitor switch position. (12) l and r master ...
Page 9: Controls and Connections
Controls and connections 9 4. Master control section (19) (20) (21) (27) (22) (23) (24) (25) (26) (28) (29) (19 & 22) aux 1 and 2 returns controls these are input controls that adjust the levels of the signal at the aux input jacks. 20) dsp/mix this is a master control that adjust the return of the ...
Page 10: Controls and Connections
10 controls and connections (30) (32) (31) (33) (34) (35) (36) 6. Rear panel 37) speaker output jacks • right/monitor — is use in stereo mode for right output or main/monitor mode for monitor output • left/main — is used in stereo mode for left output or in main/monitor mode for main output • bridge...
Page 11: Controls and Connections
Controls and connections 11 40) ac voltage selector switch before plugging in the power cord, check to see that the unit is set for the proper voltage for your area: ~115v (60hz) or ~230v 7. Speaker connection examples the following speaker connections can be used for stereo or monitor main operatio...
Page 12: Connections
Connections 12 this nady audio mixer uses 4 different types of audio connectors for the various input/output connections: (1) xlr balanced; (2) 1/4” trs phone jacks for balanced, unbalanced, stereo, or in/out inserts; (3) 1/4” ts unbalanced; (4) rca pin unbalanced figures 1. Balanced xlr input/outpu...
Page 13: Specifications
Specifications 1. Input section 2. Output section the specifications above are correct at the time of printing of this manual. For improvement purposes, all specifications for this unit, including design and appearance, are subject to change without prior notice. 13 3. Mixer section frequency respon...
Page 14: Block Diagram
Block diagram 14 spm 6600 — channels 1-6 spm 8600 — channels 1-8.
Page 15
Service for your nady audio product (u.S.) should your nady audio product require service, please contact the nady service department via telephone at (510) 652-2411, or e-mail at service@nady.Com. (international) for service, please contact the nady audio distributor in your country through the dea...