Nady Audio TMP-2 Owner's Manual

Summary of TMP-2

  • Page 1

    Tmp-2 mic preamp dual channel tube mic preamplifier o w n e r ’ s m a n u a l.

  • Page 2: Features

    Tmp-2 2 dual channel tube microphone preamplifier date of purchase ____________________________________ dealer’s name ______________________________________ city _______________________________________________ state _____________________ zip _____________________ model # ____________________________...

  • Page 3: Warning

    Important safety instructions warning attention : risque de choc electrique ne pas ouvrir an equilateral triangle enclosing a lightening flash/arrowhead symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure which may be of sufficient m...

  • Page 4: Installation

    Installation 4 to ensure years of enjoyment from your nady audio tmp-2 please read and understand this manual thoroughly before using the unit. Inspection your tmp-2 was carefully packed at the factory in packaging designed to protect the units in shipment. Before installing and using your unit, car...

  • Page 5: Controls and Connectors

    Controls and connectors 5 front panel front panel (1) power switch use this switch to power unit on or off. The integrated led will light when the unit is on. Before turning on this unit, verify connection to the proper voltage ac source, check all connections and turn down the level controls of equ...

  • Page 6: Controls and Connectors

    6 (10) (11) (12) rear panel rear panel (10) ac power cord iec connector with integrated fuse holder this standard iec power cord receptacle is used to connect the ac power to your unit. It features a built-in fuse holder for a 5x20mm, 0.5a/250v slow-blow fuse. If the fuse continuously blows, shut of...

  • Page 7: Specifications

    The specifications above are correct at the time of printing of this manual. For improvement purposes, all specifications for this unit, including design and appearance, are subject to change without prior notice. Specifications 7 notice the information in this document is subject to change, as the ...

  • Page 8

    Service for your nady audio product (u.S.) should your nady audio product require service, please contact the nady service department via telephone at (510) 652-2411, or e-mail at service@nady.Com. (international) for service, please contact the nady audio distributor in your country through the dea...