1. DL manuals
  2. Nady Systems
  3. Microphone system
  4. ENCORE II
  5. User Manual

Nady Systems ENCORE II User Manual

Manual is about: Nady ENCORE II Microphone System: User Guide

Summary of ENCORE II

  • Page 1

    Nady wireless systems are type accepted under fcc rules parts 90, 74 and 15. The device complies with rss-210 of industry & science canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference receiv...

  • Page 2

    Contents ...........................................................................................2 introduction ....................................................................................3 using this manual ...........................................................................3 syst...

  • Page 3

    Thank you for purchasing a nady encore ii diversity wireless microphone system and congratulations on your choice. The encore ii is loaded with top professional operating features and is the best performance and price value available in vhf diversity wireless systems. Introduction this booklet gives...

  • Page 4

    • available on selected frequencies in the vhf high band (171-216 mhz) for interference-free, long-range performance • proprietary companding circuitry for an industry-best 120db dynamic range, and the clearest, most natural sound available • operating range: up to 250 feet typical (depending on sit...

  • Page 5

    1. Rackmounting the receiver there are 2 options available for rackmounting the encore ii receiver: singly or side- by-side with another encore series receiver. A. Single mounting: remove the receiver side mount clip (1) from each side of the receiver (as shown) and slide in the optional erm-12 rack...

  • Page 6

    5. Connecting the audio output the encore ii receiver provides both a fixed mic level balanced audio output xlr (14) and an adjustable line level unbalanced audio output 1/4” jack (13). The level from the unbalanced output is controlled by the rear panel volume control (6). (note: as when making any ...

  • Page 7

    Af rf a b power 12-15v dc input volume balanced out unbalanced out mute 7 8 16 3 4 5 16 13 11 6 2 15 14 9 1 9 12 10 1 12 7 1. Transmitter set-up first, slide open the battery compartment door (43) to expose compartment. Insert a fresh 9v alkaline battery (45), observing polarity. Close the battery c...

  • Page 8

    13 1. Unscrew the battery compartment cover (17) and remove, exposing the battery holder (18). Insert a fresh 9v alkaline battery (19), observing the correct polarity as marked, and screw the cover back on to the microphone. Make sure the cover is screwed on completely. A fresh alkaline battery can ...

  • Page 9

    1. Snap open the battery compartment (30) and insert a fresh 9v battery (31), observing the correct polarity. Close the compartment. The wgt is provided with a 3.5 mm locking jack (32) for connecting the instrument cable (35). To secure the connection, turn the metal slip ring on the plug clockwise ...

  • Page 10

    1. Snap open the battery compartment (22) and insert a fresh 9v battery (23), observing the correct polarity. Close the compartment. 2. The wlt is provided with a 3.5 mm locking jack (24) for connecting the microphone. Plug in either the lavalier/lapel (25) or the headworn micro- phone (26), as supp...