Nady Systems HPA-8 Owner's Manual - Installation
4
INSTALLATION
To.ensure.years.of.enjoyment.from.your.NADY.AUDIO.HPA-8,.
please.read.and.understand.this.manual.thoroughly.before
using.the.unit.
INSPECTION
Your.HPA-8.was.carefully.packed.at.the.factory.in.packaging.
designed.to.protect.the.units.in.shipment..Before.installing.and.
using.your.unit,.carefully.examine.the.packaging.and.all.contents.
for.any.signs.of.physical.damage.that.may.have.occurred.in.
transit..(Note: Nady Systems is not responsible for shipping
damage. If the unit is damaged, do not return to us, but notify your
dealer and the shipping company immediately to make a claim.
Such claims must be made by the consignee in a timely manner.)
CONTENTS
Instruction.manual
HPA-8.(verify.that.the.unit’s.serial.number.is.same.as.shown.
on.shipping.carton)
AC.Power.cord
Warranty.Card
RACK MOUNTING
The.HPA-8.fits.into.one.standard.19”.rack.unit.of.space.(1.3/4”)..
Parts.of.the.unit.can.become.very.warm.during.use..This.is.nor-
mal.during.operation..Care.should.be.taken.to.ensure.that.there.is.
enough.space.around.the.unit.for.cooling.(at.least.12”.or.30cm)..
Do.not.place.the.HPA-8.on.high.temperature.devices.such.as.
power.amplifiers,.etc.,.or.the.unit.may.overheat.in.operation.
Also,.do.not.place.the.unit.on.speakers.as.this.may.cause.them.
to.move.and/or.fall.due.to.speaker.vibrations..Although.the.unit’s.
chassis.is.shielded.against.radio.frequency.(RF).and.electro-
magnetic.interference.(EMI),.extremely.high.fields.of.RF.and.EMI.
should.be.avoided.
POWER CONNECTION
The.HPA-8.has.an.internal.power.supply.and.is.designed.to.oper-
ate.from.an.external.AC.source..Power.requirements.for.electrical.
equipment.differ.from.area.to.area..Be.sure.to.confirm.that.the.
voltage.selected.by.the.voltage.selector.switch.on.the.back.panel.
is.proper.for.your.area.(120VAC/60.Hz.or.230VAC/50Hz).per.the.
information.below:
Europe (except UK): 230V,.50Hz
UK and Australia: 240V,.50Hz
USA and Canada: 120V,.60.Hz
•
•
•
•
For.other.areas,.please.check.with.local.authorities..When.ready.
to.operate,.plug.the.AC.cord.into.the.power.source..Make.sure.
that.the.unit.is.turned.off.before.connecting.to.the.AC.power.
source.to.avoid.possible.loud.transients.which.can.damage.your.
speakers.or.your.ears,.especially.when.monitoring.with
headphones.