Irw-220x o w n e r s m a n u a l infrared wireless microphone system nady systems, inc. 6701 shellmound street • emeryville, ca 94608 usa tel: 510/652-2411 • fax: 510/652-5075 www.Nady.Com.
11 contents ....................................................................................... 2 introduction ............................................................................... 3 using this manual ....................................................................... 3 system cont...
• irw-220x dual channel infrared receiver • (2x) infrared transmitters - either irw-ht6 handheld microphone or irw-lt6 body-pack with clip-on lavalier microphone • (2x) irw-1s infrared sensor w/20 ft. And 35 ft. Cables • 3 ft. Rca to 1/4" plug audio cable • bodypack lanyard • (4x) aa alkaline batter...
9 system features 4 irw-220x dual-ir wireless microphone receiver • dual receiver allows 2 channel simultaneous operation of 2 transmitters (ch a, ch b) • ir signal reception led indicators • channel a/b mix audio output rca phono jack • separate channel a and channel b volume controls • 2 ir sensor...
Irw-220x receiver front back (1) power switch (2) channel a & b ir led indicator (3) power cord (4) infrared sensor rca input (5) volume controls (6) mixed output rca jack 1. Powering the receiver plug the power cord (3) into an ac outlet (110-120 vac). Turn on the irw-220x using the power switch (1...
7 irw-1s infrared (ir) sensors (1) ir receptor (2) power led (3) wall mounts (2) (1) 6 (3) 1. Operation the ir sensors act as “antenna” for your infrared wireless microphone system. A multiple array of wide angle ir-sensitive led’s, behind the front panel receptors, receives the infrared signal emit...
