Nady Systems MM-15USB Owner's Manual - Installation
4
INSTALLATION
To.ensure.years.of.enjoyment.from.your.NADY.AUDIO..
MM-15USB.mixer,.please.read.and.understand.this.manual.
thoroughly.before.using.the.unit.
1. INSPECTION
Your.NADY.AUDIO.MM-15USB.was.carefully.packed.at.the.
factory.in.packaging.designed.to.protect.the.units.in.shipment..
Before.installing.and.using.your.unit,.carefully.examine.the.
packaging.and.all.contents.for.any.signs.of.physical.damage.that.
may.have.occurred.in.transit.
[Please note: Nady Systems is not responsible for shipping
damage. If your unit is damaged, do not return to Nady, but
notify your dealer and the shipping company (if shipped to you)
immediately to make a claim. Such claims must be made by the
consignee in a timely manner].
. POWER CONNECTION
The.MM-15USB.is.designed.to.operate.with.the.supplied
external.power.adapter..Please.make.sure.that
the.adapter.supplied.is.marked.for.the.correct.voltage
in.your.area.(120VAC/60.Hz.or.230VAC/50Hz)..Power
requirements.for.electrical.equipment.differ.from.area.to
area..In.new.installations.and.portable.sound.systems,.or
any.situation.in.which.the.AC.power.is.in.question,.it.is
wise.to.confirm.the.voltage.and.use.the.appropriate
power.adapter.unit.before.connecting.it.to.power.sources.
Check.to.see.that.the.power.adapter..is.set.to.the.voltage.for.your
area.by.referring.to.the.table.below:
Europe.(except.UK):.230V,.50Hz
UK.and.Australia:.240V,.50Hz
USA.and.Canada:.120V,.60.Hz
For.other.areas,.please.check.with.local.authorities.
.
When.ready.to.operate,.connect.the.switched-off.MM-15USB.and.
power.adapter.first,.then.plug.the.adapter.to.a.power.source.or.
wall.outlet..Make.sure.that.the.unit.is.turned.off.before.connecting.
to.the.AC.power.source.to.avoid.possible.loud.transients,.which.
can.damage.your.speakers.or.your.ears..Set.the.Main Level(21).
fader.control.to.minimum.to.further.reduce.the.chance.of.
undesired.noise.when.first.powering.up..Turn.on.your.MM-15USB.
using.the.rear.panel.ON/OFF.switch.