Nady Systems MPA-30 Features, Instructions & Technical Data - page 2
(U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at
(510) 652-2411 or e-mail at service@nady.com.
(International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom
you purchased this product.
S E R V I C E
FOR YOUR NADY AUDIO PRODUCT
NADY SYSTEMS, INC. • 6701 SHELLMOUND STREET, EMERYVILLE, CA 94608
Tel: 510.652.2411 • Fax: 510.652.5075 • www.nady.com
C O N T R O L S
& CONNECTIONS
(1) POWER ON/OFF SWITCH
Turns the unit On and Off with internal LED indicator.
2) INPUTS
These Stereo RCA inputs can be used for any line level
signal whether from a mixer, CD player, MP3 player or
Keyboard output. Channel 1 drives the internal speaker and
Channel 2 drives the external speaker.
3) VOLUME CONTROL
Controls the volume of both Ch1 and Ch2 signals.
4) EXTERNAL SPEAKER OUTPUT
This 1/4" jack outputs the powered Channel 2 signal. It
should be connected to the slave speaker with the included
20' speaker cable. The slave speaker can then be daisy-
chained to another speaker (8
Ω minimum) if desired.
Output Power:
75W RMS @ 8
Ω
100W RMS @ 4
Ω
5) AC POWER SOCKET
Connect to AC the cable plugged into a 115VAC wall socket
6) FUSE HOLDER
For 5x20mm 4A 250V fast-blow fuse.
Frequency Response: 30Hz - 20KHz (+/-3dB)
Input impedance: 10K
Ω
Sensitivity: 525mV for maximum power w/ volume at max
Maximum Input Level: >5V before distortion
Output Power:
Internal Speaker:
75W RMS @ 8
Ω
External Speaker: 75W RMS @ 8
Ω
100W RMS @ 4
Ω
Speaker: 10" 8
Ω woofer 8, 7" x 3" piezo tweeter 92dB sensitivity (1W/1M)
Dimensions: 10" D x 20" H x 15" W (25.4 x 50.8 x 38.1 cm)
Weight: Master Speaker 26.3 lbs (11.9 Kg); Slave Speaker 17.9 lbs (8.1 Kg)
(4)
(2)
(3)
(1)
(6)
(5)
S P E C I F I C A T I O N S