Nady Systems P-Cab Speakers PCS-10X Features, Instructions & Technical Data - page 2
(U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at (510) 652-2411 or e-mail at
service@nady.com
(International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you purchased this product.
O P E R A T I O N
TECHNICAL DATA
S E R V I C E
FOR YOUR NADY AUDIO PRODUCT
NADY SYSTEMS, INC. • 6701 SHELLMOUND STREE, EMERYVILLE, CA 94608
Tel: 510.652.2411 • Fax: 510.652.5075 • www.nady.com
Front View
8.59”
18.58”
10.24”
1 3/8”
Back View
Bottom View
(1) POWER ON/OFF SWITCH
(2) AC POWER CORD AND FUSE HOLDER/VOLTAGE SELECTOR
Connects to the AC power cable
The fuse holder has a triangular marker. The PCS-10X is set to the operating
voltage printed next to this marker and voltage can be changed by removing the
fuse holder and re-inserting upside down.Please make sure that your local volt-
age matches the voltage indicated on the unit, before attempting to operate the
PCS-10X. Fuses may only be replaced by same type and rating.
(3) POWER LED INDICATOR
(4) INPUTS
Balanced XLR and unbalanced 1/4” & RCA inputs.
(5) OUTPUTS
Balanced XLR and 1/4” unbalanced outputs.
(6) PEAK LED INDICATOR
This LED lights red when the output signal is clipping. If the red LED flashes
repeatedly, you should turn down the volume to avoid audible distortion and
damage to the speaker.
Note: Speakers damaged due to clipping are not covered under warranty.
(7) LEVEL CONTROL
This controls the master volume.
(8) HIGH (TREBLE) EQ CONTROL
(9) LOW (BASS) EQ CONTROL
(10) INPUT LEVEL CONTROLS
This controls levels of the individual channels.
(1)
(2)
(4)
(5)
(7)
(8)
(9)
(6)
(10)
(3)
Please save this warranty and your original sales receipt and retain with your owner’s manual for future reference.
Nady Systems, Inc. warrants to the original consumer purchaser that the speaker is free from any defects in material or workmanship for a period of one year from the date of original retail purchase.
If any such defect is discovered within the warranty period, Nady Systems, Inc. will repair or replace the speaker free of charge, subject to verification of the defect or malfunction upon return to Nady
Systems.
This warranty is subject to the following conditions:
1) This system must have been purchased from an authorized Nady dealer and all warranty service must be performed by Nady’s service department. Any service not performed by Nady will automati-
cally void this warranty.
2) Items not covered: physical damage resulting from improper handling of the speaker in transit from the factory by the shipper (Nady Systems is not responsible for such damage and all such claims
must be made against the shipping company by the consignee.); damage caused by applying amplification power to the speaker in excess of its rated power (as indicated by burnt speaker or horn
coils or other components); damage or defects caused by abuse, neglect, accident, failure to connect or operate the unit in a way that does not comply with applicable technical or safety regulations, or
improper repair, excessive heat or humidity, alteration causing cracks, broken housings or parts, appearance items; items damaged in shipment to for repair. Warranty is void if Nady serial number has
been removed.
O N E Y E A R L I M I T E D W A R R A N T Y