Nady Systems P-Cab Speakers PCS-15X Features, Instructions & Technical Data - page 2
(U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at (510) 652-2411
or e-mail at service@nady.com
(International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you purchased
this product.
O P E R A T I O N
TECHNICAL DATA
S E R V I C E
FOR YOUR NADY AUDIO PRODUCT
NADY SYSTEMS, INC. • 6701 SHELLMOUND STREET, EMERYVILLE, CA 94608
Tel: 510.652.2411 • Fax: 510.652.5075 • www.nady.com
(1) POWER ON/OFF SWITCH
(2) AC POWER CORD AND FUSE HOLDER/VOLTAGE SELECTOR
Connects to the AC power cable.
The fuse holder has a triangular marker on each side. The PCS-15X is set to the
operating voltage printed next to this marker (110VAC/60Hz or 220VAC/60Hz),
and voltage can be changed by removing the fuse holder and re-inserting upside
down. Please make sure that your local voltage matches the voltage indicated on
the unit before attempting to operate. Fuses may only be replaced by same type
and rating.
(3) POWER LED INDICATOR
(4) PEAK LED
This LED lights red when the output signal is clipping. If the red LED flashes
repeatedly, you should turn down the volume to avoid audible distortion and
damage to the speaker.
(5) INPUT 1 - Balanced XLR and unbalanced 1/4” inputs.
(6) INPUT 2 - Unbalanced 1/8” and unbalanced RCA inputs.
Note: Speakers damaged due to clipping are not covered under warranty.
(7) OUTPUT - 1/4” unbalanced output.
(8.1) INPUT 1 LEVEL CONTROL
(8.2) INPUT 2 LEVEL CONTROL
(9) MASTER VOLUME CONTROL
(10) EQ CONTROLS
(2)
(1)
(5)
(10)
(6)
(8.2)
(3&4)
(9)
(7)
(8.1)
Front View
8.39”
Back View
Bottom View
15.47”
10.24”
Please save this warranty and your original sales receipt and retain with your owner’s manual for future reference.
Nady Systems, Inc. warrants to the original consumer purchaser that the speaker is free from any defects in material or workmanship for a period of one year from the date of
original retail purchase. If any such defect is discovered within the warranty period, Nady Systems, Inc. will repair or replace the speaker free of charge, subject to verification of
the defect or malfunction upon return to Nady Systems.
THIS WARRANTY IS SUBJECT TO THE FOLLOWING CONDITIONS:
1) This system must have been purchased from an authorized Nady dealer and all warranty service must be performed by Nady’s service department. Any service not
performed by Nady will automatically void this warranty.
2) Items not covered: physical damage resulting from improper handling of the speaker in transit from the factory by the shipper (Nady Systems is not responsible for such
damage and all such claims must be made against the shipping company by the consignee.); damage caused by applying amplification power to the speaker in excess of its
rated power (as indicated by burnt speaker or horn coils or other components); damage or defects caused by abuse, neglect, accident, failure to connect or operate the unit
in a way that does not comply with applicable technical or safety regulations, or improper repair, excessive heat or humidity, alteration causing cracks, broken housings or
parts, appearance items; items damaged in shipment to for repair. Warranty is void if Nady serial number has been removed.
O N E Y E A R L I M I T E D W A R R A N T Y