Nady Systems PCL-800 Owner's Manual

Other manuals for PCL-800: Owner's Manual

Summary of PCL-800

  • Page 1

    Rack lights power conditioner & light module 1800 watts ca pacity pull pull min max over voltage standard voltage dimmer rear outlets on off cho3080 cho3081.

  • Page 2

    Congratulations! Pcl series power conditioners for advanced rf/emi noise filtering and the quietest operation of your equipment... Triple mode varistor surge and spike protection eight rear outlets (with room for 4 ¡° wall wa rts¡±) controlled by a front panel switch 15 amp rating (1800 w) with rear...

  • Page 3

    3.

  • Page 4

    Controls, functions, and connections front panel 1. Power switch outlet switch (with built-in led on indicator) activates protection and filtration to all back panel outlets. To tu r n the unit on or off, press the upper or lower portion of this button. 2. 2 retractable rack lights pull out for illu...

  • Page 5

    Rear panel 7. Power cord heavy duty 14-gauge power cord for connection to the ac power mains (120v-60hz) 8. Circuit breaker resettable 15 amp ther mal circuit breaker 9. 8 rear panel outlets emi/rfi filtered, spike/surge protected and switched 5 7 8 9.

  • Page 6

    6 1. The pcl series conditioners are the perfect accessories for any rack mount system. Install in the top slot of a standard 19-inch rack, and the 8 switched ac outlets on the rear panel will provide full safety protection to all your rack equipment. These conditioners protect your delicate electro...

  • Page 7

    Specifications protection provided high voltage varistor surge and transient suppressor, rfi/emi interference filtration outlet connectors 8 standard 3-prong grounded ac receptacles power consumption maximum 1800w/15a load power source ~120vac/60 hz circuit breaker 15a thermal type lamps (pcl-815) 5...