Nady Systems PEM-500 Owner's Manual

Manual is about: Wireless Personal In-Ear Monitor 16 Channel UHF PLL Synthesized

Summary of PEM-500

  • Page 1

    Owner’s manual wireless personal in-ear monitor 16 channel uhf pll synthesized pem-500 pem-500

  • Page 2

    Thank you for purchasing a nady pem-500 wireless personal in-ear monitor system and congratulations on your choice. This system offers all of the advantages of wireless in-ear monitoring–mobility, more focused audio, freedom from feedback, and elimination of transport issues associated with conventi...

  • Page 3

    • available on selected frequency bands within the uhf band for interference- free, long-range performance (up to 8 systems can be operated simultaneously, depending on country and frequency band) • system consists of pem-500t transmitter and one bodypack pem-500r receiver, both of which offer 16 ch...

  • Page 4

    4. Connecting the audio input the pem-500t transmitter features a 1/4" trs balanced mic input (9) and a line level balanced xlr jack for the left and right line inputs (10). The mic input allows the use of a microphone alone for easy cueing of performers while on stage, which can be useful in many a...

  • Page 5

    12 15 14 13 17 16 6 5 1 4 1 10 11 9 8 3 7 2 9 5. Selecting a channel/ multiple system operation both the pem-500t transmitter and pem-500r receiver offer a choice of 16 channels in the uhf band. Select an open frequency that doesn't interfere with any other pem-500 or uhf wireless mic system you are...

  • Page 6

    Pem-500r receiver 1. Multiple monitor mixes any number of pem-500r receivers can be used with a single pem-500t transmitter set to the same channel. Although there are individual controls on each receiver allowing different levels of volume, each receiver will receive the same transmitted monitor mi...

  • Page 7

    6. Attaching the receiver the pem-500r can be slipped into a pocket or clipped onto clothes or a belt with the belt clip (27). Note that for utmost versatility and convenience, this clip can be rotated 90˚ for attaching receiver either vertically or horizontally on clothes or belt as desired. To rot...

  • Page 8

    Pem-500r receiver maximum audio output level 20 mw minimum audio output load impedance 16 Ω rf sensitivity 2.5uv (-100 db/12 db sinad) squelch threshold spurious rejection > 55 dbc audio output connector 3.5 mm stereo (tip=left, ring=right, sleeve=ground) controls volume adjust; limiter on/off, powe...

  • Page 9

    Service for your nady audio product (u.S.) should your nady audio product require service, please contact the nady service department via telephone at (510) 652-2411 or e-mail at service@nadywireless.Com. (international) for service, please contact the nady audio distributor in your country through ...