Nady Systems PM-200A Owner's Manual - page 2
Congratulations — you have purchased one of the
finest personal stage monitors on the market today.
This unit was developed using the expertise of pro-
fessional sound engineers and working musicians.
You will find that your new NADY AUDIO Powered
Personal Stage Monitor has superior performance
and greater flexibility than any other monitors in its
price range.
The PM-200A Powered Personal Stage Monitor
is the perfect tool for monitoring audio on stage
or in rehearsal. This unit puts the controls at your
fingertips so you’ll never have to scream for “More
Monitors!” again. The speaker system is tailor-made to reduce feedback while allowing vocals
and instruments to stand out in the mix. Simply input a line level feed from the main or monitor
mixer and adjust the EQ’s and Volume to your personal liking. Or, you can input your instrument/
vocal signal directly, before outputting to the main PA, to hear yourself solo. With added features
like Headphone outputs, Line outputs, and External Speaker outputs, there are any number of
PM-200A configurations to suit your special needs. You’ll hear yourself loud and clear and never
miss the bridge again with the PM-200A by your side!
Please read this manual carefully to get the most out of your new unit. Thanks for selecting NADY
AUDIO as your choice in personal stage monitors.
2
PM-200A
Powered Personal Stage Monitor
F E A T U R E S
• Designed to reduce stage clutter and volume by putting the sound where you can most use it
— the compact, rugged, lightweight PM-200A can be mounted on a mic stand (with optional mic
stand mount adapter if needed), set on a keyboard, amp, or table for effective up-close monitor-
ing, or as a stage monitor with 4 different angled positions for optimum placement and versatility.
• Powerful internal 150W RMS amp can power internal speakers plus up to four PM-100 Personal
Stage Monitors using the two External Speaker outputs.
• Specially designed dual ferro-fluid 5” drivers offer superior gain and optimum intelligibility at key
vocal/instrument frequencies with ultimate feedback rejection. Maximum 125dB maximum SPL
cuts through even the loudest ambient noise clutter.
• Balanced 1/4” TRS and XLR input jacks (can be used simultaneously if desired), Volume con-
trol, 3-band EQ controls (High, Mid, Bass), front baffle Power On and Clipping LED indicators.
• High powered Headphone Output and convenient 1/4” balanced Line Output for daisy chaining
with other PM-200A, or connecting to mixers and PA’s.
• Amplifier’s integrated low-noise/distortion Mosfet outputs offer thermal, short circuit, and anti-
thump on/off protection. Externally selectable 115VAC or 230VAC operation.
T A B L E O F C O N T E N T S
FEATURES ...
2
WARNING .....
3
PANEL CONTROLS & CONNECTIONS ......................................................................................4
SPECIFICATIONS .........................................................................................................................7
7
S P E C I F I C A T I O N S
Mic Input ................................................................................................................. balanced XLR
Input Impedance ..................................................................................................................2KΩ
Maximum Input .............................................................................................-10.2dBm (235mV)
Sensitivity (for max output w/Volume max) .......................................................-40dBm (7.5mV)
Line Input ....................................................................................... balanced/unbalanced TRS 1⁄4”
Input Impedance ................................................................................20KΩ (10KΩ unbalanced)
Maximum Input ....................................................................................................+22dBm (10V)
Sensitivity (for max output w/Volume max) ......................................................-10dBm (230mV)
Line Output .............................................................................................................. balanced XLR
Output Impedance ...........................................................................................................1.4KΩ
Maximum Output (w/10K load) .........................................................................15.5dBm (4.3V)
EQ and Volume ........................................................................................................... rotary knobs
High .............................................................................................................+/-12dB @ 10K Hz
Mid ..............................................................................................................+/-12dB @ 2.5K Hz
Bass ............................................................................................................ +/-12dB @ 120 Hz
Headphone Output ................................................................................................1⁄4” TRS Stereo
Power ............................................................................................................. 2 x 80mW @ 32Ω
Power Amp Output .................................................... 2 internal speakers, 2 external 1⁄4” outputs
Power ......................................................................... 2 x 50W RMS @ 8Ω (Total 100W RMS)
2 x 75W RMS @ 4Ω (Total 150W RMS)
Frequency Response ..........................................................................................20Hz – 50KHz
THD ...............................................................................................................................0.055%
S/N ..
-81dB
Noise Floor ......................................................................................................................200uV
Amplifier protection ....................................................... clipping LED’s, thermal runaway, short
circuit, anti-thump on/off protection
Internal Speakers ........................................................................................................5” full-range
Impedance ........................................................................................................................... 8 Ω
Voice Coil diameter .................................................................................................................1”
Power Requirements ................................................. Selectable, 115VAC/60Hz or 230VAC/50Hz
Fuse Requirements .................................................5x20mm glass tube F.B. 6A 250V @ 115VAC
3A 250V @ 230VAC
Weight ...................................................................................................................9.6 lbs. (4.4 Kg)
Dimensions (HWD) ................................................................ 11.1” x 7” x 6.1” (28 x 18 x 15.5 cm)
The specifications above are correct at the time of printing of this manual. For improvement
purposes, all specifications for this unit, including design and appearance, are subject to change
without prior notice