Nady Systems PMC-3 Owner's manual

NADY PMC-3

Driver-Passenger

Personal Motorcycle 

Intercom with FM Radio

OWNER’S MANUAL

NADY SYSTEMS, INC.

6701 Shellmound Street, Emeryville, CA USA 94608

Tel: 510/652-2411 Fax: 510/652-5075

www.nadywireless.com

MOTORCYCLE

INTERCOM

PLEASE READ BEFORE USING YOUR PMC-3

Before you connect your intercom earphone and mic, it is important to make sure that the

metal parts of the plug and jack are clean and dry, especially in cold weather. To prevent

dirt or moisture from damaging your intercom, always wipe the metal part of the plugs

with a clean, dry cloth before plugging in. We also suggest that you use a tuner cleaner

spray (available at any electronics supply store) to spray the plugs and jacks once a month

to keep the contacts clean.

Note: When either Volume button is pressed you will hear a “clicking” sound. This is

normal, and simply indicates that the control has been activated.

SERVICE FOR YOUR NADY COMMUNICATOR

(U.S.) Should your motorcycle communicator require service, please contact the Nady

Service Department via telephone at (510) 652-2411 or e-mail to service@nadywire-

less.com for a Return Authorization (R/A) Number and a service quote (if out of war-

ranty). Make sure the R/A Number is clearly marked on the outside of the package and

enclose a cashier's check or money order (if not prepaid with a credit card).  Ship the

unit prepaid to: Nady Systems, Inc., Service Department, 6701 Shellmound Street,

Emeryville, CA 94608. Include a brief description of the problems you are experiencing.

The warranty card enclosed with this system contains additional valuable warranty

and service information. Keep it in a safe place for future possible reference.  Do

not attempt to service this unit yourself as it will void the warranty.

(International) For service, please contact the Nady distributor in your country through

the dealer from whom you purchased this product.

Contact your dealer or Nady Systems for more information on our complete line of

advanced products for your motorcycle communication needs.

with

FM

RADIO

PMC-3 Specifications

Specifications subject to change without notice

FM Radio: 88-108 MHz (mono) 

Size: 4.0" x 2.75" x .65" (102 x 70 x 17 mm)

Weight: 3.1 oz. (79 grams)

Batteries: 3 AAA, 1.5V batteries

Audio Output to Headphone: 525 mW

Headphone Impedence: 16 or 32 ohms

Mic Impedence: 600 ohms, unidirectional elec-

tret condenser

Housing Material: Cases and headset both

high impact ABS plastic

PMC3manual  7/17/01  2:06 PM  Page 1