Nady Systems RSM-3 User Manual

USER GUIDE

RSM-3 Ribbon Studio Microphone

  UNPACKING, INSPECTION, STORAGE AND TRANSPORT

Your RSM-3 microphone was carefully packed at the factory, and the shipping carton (and carrying case) was designed to protect the

unit during shipping. Please retain this container for subsequent transport and in the highly unlikely event that you ever need to return

your microphone for servicing. Please note: since the ribbon assembly of the RSM-3, as with all ribbon microphones, is extremely

fragile, you must verify immediately upon receipt of your microphone that it has not been damaged during shipment and is operating

correctly. The warranty on this microphone does not extend beyond an initial inspection, since these microphones can be so easy

damaged during handling and use. If the unit arrived damaged please return it immediately to where you bought it. Units that are

damaged in use can be returned to Nady Systems and the ribbon assembly replaced for a fixed charge (see Service section).

  STANDARD ITEMS SUPPLIED

  OPTIONAL ACCESSORIES

• RSM-3 ribbon microphone

• Padded nylon carrying case

• Padded wooden storage box

• Shockmount

• User Guide

• Warranty card

  FEATURES

Congratulations on purchasing the Nady RSM-3 Ribbon Studio Microphone. This superior neoclassic

microphone is designed for use in contemporary, state-of-the-art studios, yet offers the unique natural

sound previously only available on such classic large ribbon mics as the legendary RCA 44, which is still

used to make great recordings today after almost 70 years. Perfect for recording studio vocals, acoustic

instruments, strings, horns, orchestras and choral groups, ambient instrument audio, and many live sound

applications. Powerful and versatile, and with the unmatched natural sound of classis ribbon mics, the

RSM-3 meets the stringent requirements of even the most demanding digital recording and live

broadcasting applications.

This user guide covers the operation of the RSM-3 microphone and the available optional accessories.

To take full advantage of the superb features of your microphone, and to enjoy long and trouble-free use,

please read this user’s guide carefully. As ribbon microphones are, by their design, very sensitive to

damage from mishandling and use, it is very important to read and observe the precautions below about

proper use.

• MPF-6 Pop Filter (highly recommended, as ribbon

microphones are very susceptible to damage from strong

air blasts, as with percussive sounds during recording)

• Versatile physical and acoustic design for numerous recording

applications, including brass instruments, strings, piano,

percussion, vocals and orchestra ambiance

• Low-tension 35 mm long, 2 micron thick aluminum ribbon design

for flat and well balanced audio reproduction with a deep, full

low end; well defined, realistic mids; and sweet natural, musical

sounding highs

• Fast accurate detailed transients, ultra-high >148dB SPL

capability, overall stunning “you-are-there” realism

• Offers a choice of pickup audio depending on placement for

utmost versatility in dialing in the desired “sound”. Figure-8

audio directional (pickup) pattern for both front and rear side,

with extended sweet spots (as compared to large diaphragm

condenser mics), and slightly different frequency responses

from front and rear side. Also, increased off-axis high frequency

response on sides, with decreased high response above and

below on-axis (though lower audio levels).

• Enables often useful individual recording volume control of

separate sources, through use of stereo mic setups wherein

isolation is achieved by placing the source so that it is in the

principal axis of one mic and the off-axis null of the other

• Manufactured with the finest materials incorporating a machined

housing with advanced internal shock mount construction for the

highest structural integrity and rugged reliability

• Supplied with a shockmount, padded nylon carrying bag, and

padded wooden storage box