Nady Systems SC-100 User Manual
Congratulations!
You have just purchased one of the finest sequenced power controller on the market today. The SC-100 was developed using the
expertise of professional sound engineers and working musicians. You will find your new NADY AUDIO sequenced power controller has
superior performance and greater flexibility than any other sequenced power controller in its price range.
We recommend that you read this instruction sheet carefully to get the most out of your new unit. Thanks for selecting NADY AUDIO
and the SC-100 as your choice in sequenced power contollers.
C
SC-100
Sequenced Power Controller
U S E R G U I D E
• Convenient 1U rack unit for controlling sequenced AC power,
On/Off for up to 10 pieces of audio equipment. The controller
provides a gradual turn on process and turns the equipment off
in the reverse order.
• 10 each 3-prong AC outlets are multi national style compatible
with standard US plugs and round European plugs. The rear
panel outlets with front panel LED indicators are sequenced with
a 1 second delay. Allowing for smooth power up and down of
power amplifiers, mixer consoles, wireless equipment, etc.
• Key lock On/Off switch with bypass for secure operation.
• Internal filtering to reduce noise and spikes.
• Both the Hot and Neutral AC lines are interrupted for maximum
safety.
• Heavy-duty internal relays for superior reliability.
W A R N I N G S
IMPORTANT SAFETY INSTRUCTIONS
F E A T U R E S
1. Read all instructions before using the product.
2. Do not use this product near water (e.g., near a bathtub,
washbowl, kitchen sink, in a wet basement, or near a swimming
pool, etc.).
3. This product should be used only with a cart or stand that will
keep it level and stable and prevent wobbling.
4. This product, in combination with headphones or speakers,
may be capable of producing sound levels that could cause
permanent hearing loss. Do not operate for a long period of time
at a high volume level or at a level that is uncomfortable. If you
experience any hearing loss or ringing in the ears, you should
consult an audiologist.
5. The product should be positioned so that proper ventilation is
maintained.
6. The product should be located away from heat sources such as
radiators, heat vents, or other devices (including amplifiers) that
produce heat.
7. The product should be connected to a power supply only of the
type described in the operating instructions or as marked on the
product. Replace the fuse only with one of the specified type,
size, and correct rating.
8. The power supply cord should: (1) be undamaged, (2) never
share an outlet or extension cord with other devices so that the
outlet’s or extension cord’s power rating is exceeded, and (3)
never be left plugged into the outlet when not being used for a
long period of time.
9. Care should be taken so that objects do not fall into, and liquids
are not spilled through, the enclosure’s openings.
10. The product should be serviced by qualified service personnel
if:
A. The power supply cord or the plug has been damaged.
B. Objects have fallen into, or liquid has been spilled onto the
product.
C. The product has been exposed to rain.
D. The product does not appear to operate normally or
exhibits a marked change in performance.
E. The product has been dropped, or the enclosure damaged.
11. Do not attempt to service the product beyond what is
described in the user maintenance instructions. All other servicing
should be referred to qualified service personnel.
When using this electronic device, basic precautions should always be taken, including the following: