Nady Systems U-800 Owner's Manual

Other manuals for U-800: Owner's Manual
Manual is about: UHF 800-Channel Wireless System

Summary of U-800

  • Page 2

    Contents 2 1. Introduction 2. Using this manual this booklet provides instructions for the operation of the u-800 and includes a description of features, a quick user controls guide, a step-by-step guide to operations for each unit, system specifications, a troubleshooting guide, miscellaneous tips, ...

  • Page 3

    12. Optional accessories erm-12 single rack mount kit for one u-800 receiver erm-22 dual rackmount kit for two u-800 receivers, includes ejc-3 joining clip in the u.S. If you are experiencing operational problems with your system, please refer to the support page at www.Nady.Com for assistance. Shou...

  • Page 6

    18 uÊ/…iÊÀiviˆÛiÀÊ>˜Ìi˜˜>ÃÊŜՏ`Êliʎi«ÌÊ>Ü>ÞÊvÀœ“Ê>˜ÞʓiÌ>ÊÃÕÀv>viÃÊ܅i˜iÛiÀ possible as they can reflect away or shield the incoming rf signal. UÊvÊ̅iÊÀiviˆÛiÀ½ÃÊۜÕ“iÊvœ˜ÌÀœÊˆÃÊÃiÌÊ̜œÊ…ˆ}…]ʈÌʓ>ÞʜÛiÀ`ÀˆÛiÊ̅iʈ˜«ÕÌʜvÊ̅i attached audio mixer, causing distortion. Conversely, if the output ...

  • Page 7

    8 u-800 receiver button function the power on button (1) is used to power receiver on or off. When the power button is pressed, the power led (2) and the white backlight on the lcd display (5) will light up indicating the receiver is ready. Press the power button again to turn off the receiver. The ...

  • Page 8

    16 receiver/transmitter asc™ ir sync manual programming to manually program the pre-selected group/channel (frequency) from the receiver to the transmitter, place the transmitter’s ir receptor sensor window (37, 44) 6-12” away from the receiver’s ir window (4). Press the menu button (18) four times ...

  • Page 9

    10 audio level and peak led indicator the u-800 receiver has a 5 bar af lcd (7) display that typically shows a few bars indicating normal level audio signal from the transmitter. Occasional flickering of the fifth af lcd (peak level) on loud inputs to the transmitter is normal. If the af lcd lights up...

  • Page 10

    14 connecting input audio source lapel/head mic uses (ub-800 lt/hm) the mini 3.5mm locking input jack (39) is for connecting the audio input from a lavaliere/lapel mic (lt), a head mic™ (hm), or an instrument (gt) cable, depending on which transmitter version is being used. Secure the connection to ...

  • Page 11

    12 note: the windscreen of the uh-800 functions as a built-in antenna. For proper operation, never remove the windscreen during use, or exchange with another type. For optimum range maintain line-of-sight between the transmitter and the receiver whenever possible. Holding the microphone tightly, bri...

  • Page 12

    Fcc st a t ement 1. T h is de vic e com plies wit h part 15 of t h e fcc r u le s. Operati on is s ubj ect t o t h e f o ll owing tw o condi tions: (1) this de vic e m ay not cau se harm ful interference. (2) this device m u st accept any interference rec eived, including interference that m ay caus...