Nady Systems UHF-16 Owner's Manual

Manual is about: UHF Wireless Microphone and Instrument System

Summary of UHF-16

  • Page 1

    Uhf-16 uhf-16 uhf-16 uhf-16 uhf-16 o w n e r ’ s m a n u a l uhf-16 uhf-16 uhf-16 uhf-16 uhf-16 16 channel pll frequency synthesized uhf wireless microphone and instrument system.

  • Page 3

    3 table of contents introduction using this manual ................................................ 4 system features uhf 16 receiver ................................................. 5 ub-16 and uh-16 transmitters ............................ 5 operating instructions uhf 16 receiver 1. Mounting the...

  • Page 4

    Iiiiintroduction thank you for choosing the nady uhf-16 wireless system, and congratulations on your choice. The nady uhf-16 system is by far the best performance and price value available in professional uhf wireless. Offering clear channel operation on the wide open, uncluttered uhf band for inter...

  • Page 5

    5 system features uhf-16 receiver • state-of-the-art pll synthesized 16 channel selection, user switchable • unsurpassed uhf performance with 120 db dynamic range and operation up to 500 feet line-of-sight • rugged half-rack uhf-16 receiver with dual removable antennas (for convenient optional remot...

  • Page 6

    Operating instructions uhf-16 receiver 6 1. Mounting the receiver a. Table mounting to mount a receiver on a table or other horizontal surface, attach the four supplied rubber feet to the bottom corners of the receiver and place the receiver on the mounting surface. B. Rack mounting a single receive...

  • Page 7

    Operating instructions uhf-16 receiver 7 2. Installing antennas install antennas by connecting the two antennas included with your system, or optional remote antennas, to the two each bnc rf twist-on connectors (5) located on the back of your uhf-16 receiver. If using either single or side-by-side f...

  • Page 8

    Operating instructions uhf-16 receiver 8 4. Choosing an operating frequency choose an operating frequency by selecting any of the 16 uhf operating frequencies available in the band provided, using the up/down buttons (12). The channel selected (11d) and operating frequency (11f) icons in the lcd dis...

  • Page 9

    Operating instructions uhf-16 receiver 9 7. Connecting audio output the uhf-16 receiver provides both a fixed mic level balanced audio output xlr (4) and an adjustable 1/4” line level line output jack (3). (note: as when making any connection, make sure the amplifier or mixing board volume is at the...

  • Page 10

    Operating instructions uh-16 handheld microphone transmitter 10 1. Powering the transmitter slide open the battery compartment cover (14) and remove, exposing the battery compartment (15). Insert 2 fresh aa alkaline batteries (16), observing the correct polarity as marked, and slide the cover back, ...

  • Page 11

    Operating instructions uh-16 handheld microphone transmitter 11 4. Locking the keyboard to avoid accidental reconfiguration of the channel setting or tone squelch™, the keyboard can be locked by holding both the up and down buttons (20) at the same time for 3 seconds. See the channel display and up/...

  • Page 12

    Operating instructions ub-16 bodypack transmitter 12 1. Powering the transmitter slide open the battery compartment (21) and insert 2 fresh aa alkaline batteries (22), observing the correct polarity. Two fresh alkaline batteries can last up to 12 hours in use, but in order to ensure optimum performa...

  • Page 13

    Operating instructions ub-16 bodypack transmitter 13 5. Selecting the operating frequency in order for the system to operate properly, the same channel (frequency of operation) must be selected for the ub-16 transmitter as was chosen for the uhf-16 receiver. Press either the up or down channel selec...

  • Page 14

    Operating instructions ub-16 bodypack transmitter 14 b. Microphone use (with either a lavalier or headworn microphone) secure the connection from the lavalier (33) or headworn mic (34) cord by turning the slip ring on the plug into the transmitter clockwise to thread it on to the jack. To unplug, re...

  • Page 15

    15 channel display and up/down button operation 1. Uhf-16 receiver operation of channel display, battery status, up and down buttons, keyboard lock, and tone squelch™ a. Changing the channel assignment press up or down button to change channels. B. Selecting tone squelch™ mode hold both up and down ...

  • Page 16

    16 the uhf 16 system is available with a choice of three frequency bands, each with 16 user-selectable frequencies. Select the band and frequencies appropriate to the area/country in which the system is to be used. 1 726.10 mhz 793.40 mhz 846.20 mhz 2 726.50 mhz 794.00 mhz 846.60 mhz 3 727.00 mhz 79...

  • Page 17

    Specifications 17 uhf 16 system operating frequency range: 16 channels switchable in pre-programmed bands up to 26 mhz wide in the 726-865 mhz range (country dependent) freq. Synthesized: pll system with frequency stability frequency response: 30 hz-15 khz ± 3 db dynamic range: 120 db harmonic disto...

  • Page 18

    Service for your nady wireless system 18 (u.S.) if you experience any operational problems with your system, please see the support page on the nady website: www.Nady.Com for assistance. Should your wireless system require service, you must contact the nady service department at 510.652.2411 for a r...

  • Page 19

    6701 shellmound street • emeryville, california 94608 tel: 510.652.2411 • fax: 510.652.5075 • www.Nady.Com.