Uhf-3 single channel uhf digitru diversity wireless system.
3 uhf-3 receiver • half-rack receiver design with retractable front panel dual antennas • clear channel operation on the wide open, uncluttered uhf band for interference-free performance in any application or locale • nady’s proprietary companding circuitry for an industry best 120db dynamic range, ...
5 5. Connecting the audio output the uhf-3 receiver provides both a fixed mic level balanced mic audio output xlr (7) and an adjustable line level aux audio output 1/4" jack (10). (note: as when making any connection, make sure the amplifier or mixing board volume is at the minimum level before plug...
7 unscrew the battery compartment cover (16) and remove, exposing the battery holder (17 ). Insert 2 fresh aa alkaline batteries (18), observing the correct polarity as marked, and screw the cover back on to the microphone. Make sure the cover is screwed on completely. Fresh alkaline batteries can l...
9 (note: scratchy noises can sometimes occur when some electric guitars with dirty pots or connections are used with any wireless system. Therefore, the supplied instrument cord (34) has a factory installed capacitor inside the 1/4" plug. This capacitor provides first order filtering of the rf signa...
11 uhf-3 overall system performance frequency response 30 hz - 18 khz, +/– 3 db dynamic range 120 db total harmonic distortion rf carrier frequency range uhf, choice of single frequencies from 470-500 mhz frequency stability +/- 0.005%, crystal controlled modulation fm (f3e), +/-20khz normal operati...
Owner's manual nady wireless systems are type accepted under fcc rules parts 90, 74 and 15. The device complies with rss-210 of industry & science canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any inte...
