Nady Systems WPM-1V User Manual

Offering the proven advantage and convenience of wireless operation, the WPM-1V wireless

podium microphone is the most practical option in many podium, lectern and desktop

conferencing applications.

Congratulations!

You have just purchased one of the finest wireless podium microphone on the market today.  The WPM-1V

was developed using the expertise of professional sound engineers. You will find your new VHF wireless

podium microphone  has superior performance and greater flexibility than any other podium microphone in its

price range.

We recommend that you read this user guide carefully to get the most out of your new unit. Thanks for

selecting NADY Systems and the WPM-1V as your choice in podium microphones.

WPM-1V

VHF Wireless Podium Microphone

U S E R G U I D E

• Superior, clear audio for best possible communication

• Up to 200’ ultra reliable reception range for utmost versatility and

operating ease in any application - simplifies setup with no

cumbersome cabling required between mic and amplifier 

• Offering top performance indistinguishable from the best

hardwired podium microphones

• Ideal for desktop conferencing, with no clutter of cables, for the

cleanest, simplest possible installation. Up to 8 WPM-1V

systems (all on different frequencies) can be operated

simultaneously at the same time (up 14 total if combining the

VHF and the WPM-2U UHF systems).

• Operates on a single 9V alkaline battery

F E A T U R E S

C O N T R O L S

(1)

(2)

(3)

(4)

(5)

(6)

(1) AUDIO MUTE ON/OFF SWITCH

This switch is for muting or unmuting the audio while the transmitter is powered ON. Use as needed for

easy control of the mic. This is the preferred method for operating with intermittent audio ON requirements

during a continuous use application. Alternatively the transmitter can also be turned ON/OFF with the

POWER SWITCH, but that is not generally recommended due to possible transient noises which can

result sometimes when operated this way.

(2) LED INDICATOR

This LED flashes once when powering the transmitter ON, indicating a useable battery.  When it stays on

continuously it indicates the battery is low and must be replaced. 

(3) MICROPHONE

This unidirectional microphone is designed to pick up sound sources directly in front of it.  It plugs into the

base through the XLR connector. The neck is adjustable and easy to bend in any direction. Speak into the

mic from a distance of 6" to 12" for optimum performance. Also follow the instructions in the manual for the

accompanying wireless receiver for proper setup of the audio signal from the receiver.

(4) BATTERY COMPARTMENT

The unit is powered by a single 9V alkaline battery. Replace when the LED

INDICATOR lights continuously.

(5) VOLUME CONTROL

This volume control is used to adjust input audio level for optimum

performance. Turn clockwise for maximum audio sensitivity and

counterclockwise for minimum audio sensitivity.

(6) POWER ON/OFF SWITCH

Used to power the transmitter ON or OFF.

1 x 9V