Nagasaki PPC-3012PT User Manual - page 11
- 11 -
2) Press Power button, red light turns green. Display appears in 3 seconds.
3) Press Power ?
1 button again to switch off TV. Green light turns red and display off.
Warning: Electrical currents may still remain in the TV after power off. Unplug the
power cord if you intend not using TV for a long period.
SECTION 4 BASIC OPERATION
4.1 During Normal Operation
Press Channel
5
? ? button to select TV channels
Press Volume
4
+ or - button to adjust the Audio volume
4.2 In Menu Mode
1.
Press Menu
2
button as ENTER / EXIT
2.
Press Channel 5 ? ? button to select specific function for adjustment
3.
Press Enter
8
button on the Remote Control (or Source
3
button on Control Pad)
as SELECT.
Note: You will be using these buttons all the time to make any adjustment.
4.3 Select Display/Audio Source
1) Press Source 3 button to switching among input sources.
2) Displays orders: PCbCr/YPbPr ? S-Video 2 ? S-Video 1 ? Video 2 ?
Video 1 ? TV ? RGB(PC mode)
3) Press Menu 2 button to set up TV displays, Languages and other
settings … etc
Note: The system can not display TV signal and Video1/S-Video1 signal at