Nagasaki PPC-812T User Manual - page 9
9
SECTION 4 BIOS SETUP
4.1 BIOS Setup
The 8” LCD built in is a Sharp TFT LCD with 640 x 480 resolution and a high brightness of 380 –
400 cd/m2. Please be sure to choose the correct Display Device and Panel Type at the Advanced
Chipset Features Setup in case you change the original BIOS setup by accident. Follow the
following procedures :
Step 1 : Enter into BIOS Setup Main menu
Step 2 : Choose Advanced Chipset Features Setup
Step 3 : Move to Display Device item, select [ CRT+LCD ]
Step 4 : Move to Panel Type item, select [ 00 ]
Step 5 : Save the setting and Exit the BIOS, restart the system
Finish.
BIOS Set-up :
BIOS Main
èAdvanced
Chipset Features setup
LCD panel
Model No.
Size
Mainboard
Panel Type
Display Device
Manufacture
PPC-812T
8”
NASA-6822VLLA
00
CRT + LCD
Sharp, Japan
PPC-872T
8”
NASA-6822VLLA
00
CRT + LCD
Sharp, Japan
SECTION 5 CPU CLOCK AND RATIO SETTING
Only VIA C3 1.0GHz low power CPU can be used on this mainboard.
Note
: BIOS setting must select 133MHz as CPU clock speed and 7.5 ratio. You can
also select a lower ratio than 7.5 in order to reduce the thermal heat of the system.