W o r l d c l a s s h i f i o w n e r s m a n u a l power supplies: supercap, hi-cap, flatcap 2, napsc i s s u e 1.
1 2 cables and connections please do not modify the standard interconnect cables supplied with your naim equipment. This is important for safety as well as performance. One end of each cable is marked with a band to establish its correct orientation. The band always marks the end that connects to th...
2 3.3 mains supply where fused plugs are used 13 amp fuses should be fitted. Fuses of a lower rating will fail after a period of use. A hi-fi system usually shares a mains circuit with other household equipment some of which can cause distortion of the mains waveform. In some naim equipment such dis...
3 in some circumstances, depending on where you live and the earthing arrangements in your home, you may experience radio frequency interference. Controls on broadcasting in some territories allow very high levels of radio frequency radiation and both the choice and exact siting of equipment may be ...
4 power power supply rear panels mains input ch1 nc -ve ch 2 sockets 3, 4, 5 +ve ch1 ch2 -ve +ve socket 1 ch1 nc -ve ch 2 sockets 1, 2, 3 +ve ch1 ch2 -ve +ve socket 4 1 2 3 4 5 1 2 3 4 1 2 3 4 5 6 6 7 socket 2 +ve nc nc -ve +ve ch1 nc ch 2 -ve sockets 2, 3, 4, 6 sockets 1, 5 +ve ch1 -ve +ve ch2 sock...
5 cable direction marker 4 to 4 pin din 240° 5 to 5 pin din burndy interconnect cables nac 252 connection to supercap note extra supercap, hi-cap or flatcap 2 for snaxo or ixo5. Supercap - socket 5, hi-cap - socket 3, flatcap 2 - socket 2. To snaxo or ixo5 mains input hi-cap note for best performanc...
6 mains input napsc nac 282 connection to supercap or with extra supercap for snaxo cable direction marker 4 to 4 pin din 240° 5 to 5 pin din interconnect cables nac 282 mains input to stereo power amplifiers supercap mains input to snaxo supercap to mono or dual mono power amplifiers.
7 nac 282 connection to hi-cap and napsc or nac 282 connection to two hi-caps (or flatcap 2s) mains input or with extra flatcap 2 or hi-cap for snaxo or ixo5 power mains input to snaxo or ixo5 (using external power supply) for cd5, headline or stageline (additional) interconnects required cable dire...
8 mains input to stereo power amplifiers to mono or dual mono power amplifiers nac 202 hi-cap nac 202 connection to hi-cap and napsc cable direction marker 4 to 4 pin din 240° 5 to 5 pin din interconnect cables to snaxo or ixo5 nac 112 connected to flatcap 2 power mains input for cd5, headline or st...
9 supercap, hi-cap, flatcap 2, napsc dc outputs supercap 13 x 24v, 2 x 12v hi-cap 2 x 24v flatcap 2 2 x 24v, 2 x 22v napsc 1 x 18.5v mains supply 100v, 115v, 230v 50 or 60hz case size (h x w x d) supercap 87 x 432 x 314mm hi-cap 87 x 207 x 314mm flatcap 2 70 x 432 x 301mm napsc 57 x 121 x 187mm decl...
Naim audio limited, southampton road, salisbury, england sp1 2ln telephone: +44 (0) 1722 332266 fax: +44 (0) 1722 412034 www.Naim-audio.Com part no. Owmps 12-001-0042 drg no. Na301002-400
