NAIM HI-CAP Owner's Manual

Other manuals for HI-CAP: Manual, Installation Instructions Manual

Summary of HI-CAP

  • Page 1

    O w n e r s m a n u a l p o w e r s u p p l i e s e n g l i s h d e u t s c h f r a n Ç a i s i t a l i a n 0

  • Page 2

    Safety instructions in order to comply with current european safety regulations it is essential that the naim loudspeaker connectors supplied with amplifiers and loudspeakers are used. Do not under any circumstances allow anyone to modify your naim equipment without first checking with the factory, ...

  • Page 3

    E1 1 connections it is important for both safety and performance that the standard cables supplied are not modified. 1.1 interconnect cables if options are available with your equipment and installation, din interconnect sockets should be used in preference to rca phono sockets. One end of each naim...

  • Page 4

    E2 3 general installation naim equipment is designed to offer the finest performance possible avoiding compromise wherever practical. This can lead to circumstances that may be unfamiliar. The notes that follow contain advice specifically related to naim equipment as well as more general warnings ab...

  • Page 5

    E3 mains input and fuse 4 power supply installation power supplies should be installed on an equipment rack intended for the purpose in their final location before connecting cables or switching on. Ensure that power amplifiers are switched off and the preamplifier volume is turned down before power...

  • Page 6

    E4 mains input and fuse 5.1 hi-cap rear socket 1 socket 2 socket 3 socket 4 ch2 -ve ch1 nc socket 1, 2 & 3 +ve -ve +ve ch1 ch2 socket 4 5 power supply installation power supplies should be installed on an equipment rack intended for the purpose in their final location before connecting cables or swi...

  • Page 7

    E5 7 declaration of conformity to appropriate standards manufacturer naim audio limited, southampton road, salisbury, england, sp1 2ln products cd555ps supercap, xps, hi-cap, flatcap 2x, napsa, napsc safety en 60065 emc en55013 - sound and television broadcast receivers and associated equipment. En5...

  • Page 8

    Naim audio limited, southampton road, salisbury, england sp1 2ln tel: +44 (0) 1722 426600 fax: +44 (0)870 2244702 w: www.Naim-audio.Com part no. 12-001-00?? Drawing no. Na101003-???.