1. DL manuals
  2. NAIM
  3. Other
  4. NA-P 200 - AMPLIFIER
  5. Manual

NAIM NA-P 200 - AMPLIFIER Manual

Other manuals for NA-P 200 - AMPLIFIER: Manual, Reference Manual, Reference Manual

Summary of NA-P 200 - AMPLIFIER

  • Page 1

    O w n e r s m a n u a l power amplifiers: nap 500, nap 300, nap 250, nap v145, nap 200, nap 150, nap v175 i s s u e 1 w o r l d c l a s s h i f i.

  • Page 2

    1 2 cables and connections please do not modify the standard interconnect cables supplied with your naim equipment. This is important for safety as well as performance. One end of each cable is marked with a band to establish its correct orientation. The band always marks the end that connects to th...

  • Page 3

    2 3.3 mains supply where fused plugs are used 13 amp fuses should be fitted. Fuses of a lower rating will fail after a period of use. A hi-fi system usually shares a mains circuit with other household equipment some of which can cause distortion of the mains waveform. In some naim equipment such dis...

  • Page 4

    3 in some circumstances, depending on where you live and the earthing arrangements in your home, you may experience radio frequency interference. Controls on broadcasting in some territories allow very high levels of radio frequency radiation and both the choice and exact siting of equipment may be ...

  • Page 5

    4 6.1 connections notes the negative input and output connections for each channel are common. The mains earth (ground) should always be connected regardless of what other equipment is used in conjunction with naim power amplifiers. This only grounds the case and the electrostatic screen within the ...

  • Page 6

    5 nap 500 connection & specifications na ps500 rear - + + - input socket 1 input socket 2 to preamp power supply. Left, ch1 to preamp power supply. Right, ch2 left speaker ch1 right speaker ch2 7.1 nap 500 connection to na ps500 power supply ch1 -ve -ve nc nc ch 2 mains in 7.2 specifications nap 500...

  • Page 7

    6 8 installation and operation the nap 300 and na ps300 should be installed in their final operating locations before connecting cables or switching on. Switch on the source and preamplifier components, with the volume turned down, before switching on the nap 300. The nap 300 power button is located...

  • Page 8

    Na ps300 rear mains in 7 nap 300 connection & specifications 9.1 nap 300 connection to na ps300 power supply left speaker ch1 - + right speaker ch2 to preamp power supply. Right, ch2 - + to preamp power supply. Left, ch1 1 2 input socket 1 input socket 2 ch1 -ve -ve nc nc ch 2 9.2 specifications nap...

  • Page 9

    8 10.1 connection notes the negative input and output connections are all common. The mains earth should always be connected regardless of what other equipment is used. This only grounds the case and the electrostatic screen within the transformer, and is not connected to the signal negative. In ord...

  • Page 10

    9 nap 250 connection & specifications 11.1 nap 250 rear ch2 -ve ch 1 input socket mains in 11.2 specifications nap 250 power output: continuous, 8 ohms 80 watts per channel transient 400 va quiescent power consumption 25va voltage gain +29db input impedance 18 kilohms frequency response -3db @ 2hz a...

  • Page 11

    10 12.1 connection notes the negative input and output connections are all common. The mains earth should always be connected regardless of what other equipment is used. This only grounds the case and the electrostatic screen within the transformer, and is not connected to the signal negative. In or...

  • Page 12

    11 nap v145 connection & specifications 13.1 nap v145 rear -ve i/p input socket mains in 13.2 specifications nap v145 power output: continuous, 8 ohms 80 watts transient 400 va quiescent power consumption 15va voltage gain +29db input impedance 18 kilohms frequency response -3db @ 2hz and 65khz case...

  • Page 13

    12 14.1 connection notes the negative input and output connections are all common. The mains earth should always be connected regardless of what other equipment is used. This only grounds the case and the electrostatic screen within the transformer, and is not connected to the signal negative. In or...

  • Page 14

    13 nap 200 & nap 150 connection & specifications 15.1 nap 200 rear ch1 -ve +ve ch 2 input socket ch1 -ve +ve ch 2 input socket mains in 15.2 specifications nap 200 power output: continuous, 8 ohms 70 watts per channel transient 300 va quiescent power consumption 11va voltage gain +29db input impedan...

  • Page 15

    14 nap v175 16.1 connection notes the mains earth grounds only the case and the electrostatic screen within the transformer and is not connected to the signal negative. The mains earth must always be connected to “ground” regardless of any other equipment used. In order to avoid hum-loops the signal...

  • Page 16

    15 nap v175 connection & specifications mains in power to a/v processor ch1 nc ch2 -ve input socket 2 cen nc nc -ve input socket 1 + - - + - + 1 2 17.1 nap v175 rear 17.2 specifications nap v175 power output: continuous, 8 ohms 50 watts per channel quiescent power consumption 13va channels three vol...

  • Page 17

    16 declaration of conformity to appropriate standards manufacturer naim audio limited, southampton road, salisbury, england, sp1 2ln products nap 500, na ps500, nap 300, na ps300, nap 250, nap v145, nap 200, nap 150, nap v175 safety hd 195-s6 en 60 065 emc emissions tested to: en 55013 - sound and t...

  • Page 18

    Part no. Owmpa 12-001-0038 drg no. Na202001-400 naim audio limited, southampton road, salisbury, england sp1 2ln telephone: +44 (0) 1722 332266 fax: +44 (0) 1722 412034 www.Naim-audio.Com.