NAIM SNAXO 242 - SNAXO Manual

Other manuals for SNAXO 242 - SNAXO: Owner's Manual

Summary of SNAXO 242 - SNAXO

  • Page 1

    W o r l d c l a s s h i f i o w n e r s m a n u a l active crossovers: snaxo 362, snaxo 242 i s s u e 1.

  • Page 2

    1 2 cables and connections please do not modify the standard interconnect cables supplied with your naim equipment. This is important for safety as well as performance. One end of each cable is marked with a band to establish its correct orientation. The band always marks the end that connects to th...

  • Page 3

    2 3.3 mains supply where fused plugs are used 13 amp fuses should be fitted. Fuses of a lower rating will fail after a period of use. A hi-fi system usually shares a mains circuit with other household equipment some of which can cause distortion of the mains waveform. In some naim equipment such dis...

  • Page 4

    3 in some circumstances, depending on where you live and the earthing arrangements in your home, you may experience radio frequency interference. Controls on broadcasting in some territories allow very high levels of radio frequency radiation and both the choice and exact siting of equipment may be ...

  • Page 5

    Active crossover rear panels 4 6.1 level adjustment level adjustment for each crossover output section is available within the snaxo 362 and 242. As delivered, the level adjustment is set nominally flat. Contact your dealer for further information and advice on level adjustment. Active crossovers 6 ...

  • Page 6

    5 snaxo power supply connection 8.1 snaxo 362 connected to supercap power supply 8.2 snaxo 242 connected to hi-cap power supply mains input from preamplifier power supply supercap snaxo snaxo mains input hi-cap from preamplifier power supply cable direction marker 4 to 4 pin din 240° 5 to 5 pin din ...

  • Page 7

    6 snaxo connection 9.1 snaxo 362 connected to three nap 300 power amplifiers left speaker hf - + right speaker hf - + left speaker mf - + right speaker mf - + left speaker lf - + right speaker lf - + snaxo nap 300 nap 300 nap 300 cable direction marker 4 pin din to xlr (left) 4 pin din to xlr (right...

  • Page 8

    Mains in left speaker lf - + right speaker lf - + mains in left speaker mf - + right speaker mf - + mains in left speaker hf - + right speaker hf - + 7 snaxo connection 9.2 snaxo 362 connected to three nap 250 power amplifiers nap 250 nap 250 nap 250 snaxo cable direction marker 4 pin din to xlr int...

  • Page 9

    8 snaxo connection mains in left speaker lf - + right speaker lf - + mains in left speaker hf - + right speaker hf - + 9.3 snaxo 242 connected to two nap 250 power amplifiers nap 250 nap 250 snaxo cable direction marker 4 pin din to xlr interconnect cables note • connection to two nap 200s or nap 15...

  • Page 10

    9 declaration of conformity to appropriate standards manufacturer naim audio limited, southampton road, salisbury, england, sp1 2ln products snaxo 362, snaxo 242 safety hd 195-s6 en 60 065 emc emissions tested to: en 55013 - sound and television broadcast receivers and associated equipment immunity ...

  • Page 11

    Naim audio limited, southampton road, salisbury, england sp1 2ln telephone: +44 (0) 1722 332266 fax: +44 (0) 1722 412034 www.Naim-audio.Com part no. Owmxo 12-001-0040 drawing no. Na503001-400