NAIM UNITISERVE-SSD - Reference Manual - page 16
14
Operation - The Display Inter face
Note:
Music files should never be added to or deleted from
Music Stores via an alternative computer operating system.
Backup Music:
Enables UnitiServe-SSD backups to be
monitored and their history interrogated.
Note:
Backup routines can be viewed and backup
locations added via the Music Stores menu.
Recycle Bin:
Displays a list of deleted items and enables
either their restoration or permanent erasure.
4.8.7 UPnP™ Settings
The UnitiServe-SSD operates as a UPnP™ music server
providing music files to any network attached UPnP™
compatible playback device. Selecting
UPnP™ Settings
from the System menu opens the UPnP™ Settings Menu to
enable the UnitiServe-SSD UPnP™ settings to be configured
appropriately.
Server Name:
Select
Server Name
to specify the name
of the UnitiServe-SSD UPnP™ server that will be seen by
UPnP™ playback devices. The name can be changed
by selecting the name field to open a text entry screen.
Connected UPnP™ playback devices will have to be
restarted if the UnitiServe-SSD name is changed.
Device Views:
Select
Device Views
to specify how the
UPnP™ playback device views and browses the music
files available on the UnitiServe-SSD and any connected
Network Share or USB device. Select
All Music
to view and
browse all the files available to the UnitiServe-SSD. Select
CD Collection
to view and browse just the ripped CDs held
by UnitiServe-SSD Music Stores. Select
Browse by Device
to
view and browse the files held individually on each device
connected to the UnitiServe-SSD.
Note:
Deselecting all Device View options will make all
music unavailable for UPnP™ playback.
Music Views:
Select
Music Views
to specify the information
displayed by the UPnP™ playback device for each
music file available from the UnitiServe-SSD. Albums,
Artists, Playlists, Genres, Tracks, Composers, Conductors,
Performers, and Newest CDs can be collectively or
individually selected.
A-Z Index Options:
Selecting
A-Z Index Options
enables
music collections to be divided alphabetically into
segments when displayed by the UPnP™ playback device.
First select
Show Index
to switch on segmented display
and then select the preferred alphabetic segment option.
The number in the right hand column corresponds to the
number of items in the music collection above which the
selected alphabetic segmentation is implemented. The
number can be adjusted for each segmentation option.
Language:
Select
Language
to specify the interface
language that the UPnP™ playback device will display
when accessing the UnitiServe-SSD.
Compatibility:
Select
Compatibility
to specify the audio
data
Stream Format
that the UnitiServe-SSD will stream to
the UPnP™ playback device and to switch CD artwork
transmission to the playback device
on
or
off
.
The Stream Format options available are
Native
,
CD
44.1kHz/16 bit
and
Convert to WAV
:
Native:
Streams audio files in the same format as they are
stored.
CD 44.1kHz/16 bit:
Converts streamed files to CD format.
Convert to WAV:
Converts files to WAV format while
retaining their native sample rate and bit depth.
Note:
Native stream format offers the highest potential
audio quality followed by Convert to WAV and finally CD
44.1kHz/16 bit. The appropriate choice will depend on the
capability of the playback hardware. Select Native initially
and check that the playback hardware operates correctly
with all stored file formats. If it fails to operate at any time
select Convert to WAV. If it still fails occasionally select CD
44.1kHz/16 bit.
Reset to Defaults:
Select
Reset to Defaults
to return the
UnitiServe-SSD UPnP™ settings to their defaults.
4.8.8 System Status
Selecting
System Status
displays a list of current system
status and setup parameters.